Instruction manual

CONTROL PANEL

PLEASE TAKE NOTE OF THE FOLLOWING

 Always empty the unit of all ice and water before storage, or between uses.

 The first sets of ice cubes will take slightly longer to produce as the compressor needs

to warm up.

 A small amount of heat may emanate from the unit as the unit needs to release heat

while working

 After extended use of 5 hours, switch the machine off and let it cool for at least one

hour before commencing use.

CLEANING

1. Before cleaning, always unplug the appliance.

2. Ensure that the unit is empty of all ice and water. Open the valve at the rear of the unit

to allow surplus water to drain. Gently tilt the unit to ensure total drainage, to a

maximum of 45 degrees.

3. Wipe the inside and outside of the unit with a soft cloth moistened with a little water.

4. Do not clean the inside or outside with any abrasive scouring pad or steel wool as this

will damage the finish. Do not use any detergents to clean the unit.

5. Do not immerse the unit in water or any other liquid.

6. After cleaning, leave the lid open for a while to allow the unit to dry thoroughly.