Installation Guide

STEP 5
Locate the bottom panel. This component looks similar to the shelves however the bottom panel has two (2) holes located on the
front flange. Insert the bottom panel flanges into the bottom shelf notches located on the back panel and both upright panels. Be
sure that the bottom panel flange containing the holes is facing towards the front of the unit. See Figure 5.
STEP 6
Place the first shelf into the unit by inserting shelf panel flanges into the shelf notches located on the back panel and both upright
panels. Repeat this process for the remaining three (3) shelves. See Figure 6.
Figure 5
Figure 6
Shelf placement
Bottom shelf inserted
into side panel shelf notch
Holes toward the front
of the unit
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes
no product assembly or installation liability. Copyright © 2016 Salsbury Industries. All rights reserved. (Rev. 04, 6/24/2016)
SALSBURY INDUSTRIES
1010 East 62nd Street, Los Angeles, CA 90001-1598
Phone: [phone] Int’l Phone: [phone] Fax: [phone] Int’l Fax: [phone]
www.lockers.com [e-mail]
Page 3 of 5