Installation Guide

8. Fasten Right Door with holes for Handle and lock to hinges on right side of Frame. Attach using two (2) screws and nuts per each of the three (3)
hinges. Repeat to fasten Left Door to hinges on left side of Frame. For this step it may be more convenient to stand the cabinet assembly up
vertically. However, the illustrations show the cabinet remaining in the beginning position. See Figure 5.
Figure 5
9. Mount Handle on Right Door with two (2) screws and lockwashers. Insert Lock Bar Guides into slots on top and bottom of Right Door. Ensure
that Guides are fully inserted and locked in place. See Figure 6.
Figure 6
SALSBURY INDUSTRIES
1010 East 62
nd
Street, Los Angeles, CA 90001-1598
Phone: [phone] Int’l Phone: [phone]
Fax: [phone] Int’l Fax: [phone]
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2010 Salsbury Industries. All rights reserved. (Rev. 04, 1/6/2010) Page 4 of 9