Installation Guide

SALSBURY INDUSTRIES
1010 East 62
nd
Street, Los Angeles, CA 90001-1598
Phone: [phone] Int’l Phone: [phone]
Fax: [phone] Int’l Fax: [phone]
Mail Houses – 4750
Post Mounting Installation Instructions
Made of electro-galvanized steel sheet with a durable powder coat finish and a stainless steel mail flap, Salsbury 4750 mail houses will provide years
of maintenance free service.
Mounting Mail House on a Post
This instruction sheet is for installing the 4750 mail house on a
Salsbury standard mailbox post. Other installation instructions are
available for mounting the post in a concrete footing or mounting the
unit to a wall.
The top plate of the standard mailbox post has four tapped holes.
There are four 5/16” hex washer head bolts provided with the post to
attach the mailbox to the post. Open the locked front door and install
the four hex washer head bolts through the four holes in the inside
floor of the mailbox to the top plate of the standard mailbox post.
4750 Mail House
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2006 Salsbury Industries. All rights reserved.