inst collection units

SALSBURY INDUSTRIES
1010 East 62
nd
Street, Los Angeles, CA 90001-1598
Phone: [phone] Int’l Phone: [phone]
Fax: [phone] Int’l Fax: [phone]
www.mailboxes.com engineering
@mailboxes.com
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2008 Salsbury Industries. All rights reserved. (Rev. 02, 2/6/2008)
Collection Units – 3600 Series
Rear Loading Instructions
(See first page for front loading instructions.)
With a rugged all aluminum construction, the Salsbury’s 3600 series
mail collection unit will provide years of maintenance free service.
The 3 rear loading units in the series are sized vertically to match the
height of the most commonly installed 3600 series horizontal
mailboxes.
Notes
1. Wall opening and lumber frame must be square.
2. Collection units should be shielded from direct weather conditions.
3. Hardware is not included to install units into rough opening.
4. Customer to supply mail receiving receptacle for rear loading
collection units.
Installation Instructions
1. It is recommended that the collection unit be unpacked and
reviewed before construction of the rough opening and support
framing. The collection unit is shipped fully assembled.
2. Using standard construction framing methods, frame wall
according to the rough opening dimensions provided.
3. Place unit in rough opening and securely fasten to the support
framing with screws through the holes provided. Caution: Do not
deform, force, or twist the frame to fit an incorrect rough
opening or against an irregular surface, as this will affect the
alignment of the assembly.
FRONT and REAR LOADING Installation Instructions