Installation Guide

8. The purchase and installation of the rear covers is optional. The
rear cover option includes a hinged cover attached to a lockable
cover strip on the hinge side (for an adjacent cover) and a lockable
cover strip (without cover) for a single box column or the end of a row
of boxes. See the illustration on this page. The lockable rear cover
and the lockable cover strip are installed instead of the non-lockable
cover strips that come with the rack ladders. They are installed over
the threaded studs on the rear of the rack ladder and the provided
hex nuts are installed on each threaded
stud. This also clamps the modules into the rack ladders and
completes the installation.
Trim Installation
Rack Ladder and Rear Cover Installation
SALSBURY INDUSTRIES
1010 East 62nd Street, Los Angeles, CA 90001-1598
Phone: [phone] Int’l Phone: [phone]
Fax: [phone] Int’l Fax: [phone]
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2008 Salsbury Industries. All rights reserved. (Rev. 02, 7/10/2008)