Product Manual
P a g e | 23
20-62 VHF & UHF TRANSMITTER
Product Manual
Sea Air and Land Communications Ltd, 10 Vanadium Place, Addington, Christchurch 8024, New Zealand June 2020
Salcom UDP/TCP Test Tool
Salcom provides a simple tool for testing TCP/IP and UDP Ethernet connections. This can be
downloaded from the Salcom website under the 20-62 product page.
This tool may be used to:
• Establish and test connections,
• Send serial commands,
• Initiate paging messages.
Testing a connection
➢ If the 20-62 is configured as a server, the test tool should be a client.
➢ Enter both IP address and port numbers
➢ Click “Connect”
➢ Enter data to send in the bottom line and click “SEND”
➢ Any returned data will appear in the Data Received box.
➢ The serial command “SN?” will return the serial number and product information, and can
be used as a handy test command.
➢ “CA1234560 1 Hello” can be used to initiate a paging message in Salcom protocol.