SDS

ManualsBrandsSAKRETE ManualsBuilding materials8.6 oz. Rapid Setting Anchoring Epoxy

Safety Data Sheet

SAKRETE Rapid-Setting Anchoring Epoxy

©Roberts Concrete Products (a TCC Materials company)

Version 1.0

Page 1 of 11

Roberts Concrete Products Emergency Telephone Number: Revision Date

2025 Centre Point Boulevard, Suite 300 651-688-9116 October 2017

Mendota Heights, MN 55120-1221 Information Telephone Number

651-905-8137

Section 1: Product Identification

Product Type: Sealant & Adhesive

Product Name:

SAKRETE Rapid-Setting Anchoring Epoxy – Epoxy Resin

Section 2: Hazard Identification

Classification of the substance or mixture:

GHS07

Skin Irrit. 2 H315 Causes skin irritation.

Eye Irrit. 2A H319 Causes serious eye irritation.

Skin Sens. 1 H317 May cause an allergic skin reaction.

Label elements

GHS label elements: The product is classified and labeled according to the Globally

Harmonized System (GHS).

Hazard pictograms

GHS07

This chemical has been evaluated according to GHS (Globally Harmonized System)

and by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200).

This Safety Data Sheet (SDS) contains valuable information critical to the safe handling

and proper use of this product. This SDS should be retained and available for

employees and other users of this product.

Signal Word: Warning

Hazard Statements:

Cause skin irritation.

May cause serious eye irritation.

May cause an allergic skin reaction.

Summary of content (11 pages)

PAGE 1
Safety Data Sheet SAKRETE Rapid-Setting Anchoring Epoxy ©Roberts Concrete Products (a TCC Materials company) Version 1.
PAGE 2
Safety Data Sheet SAKRETE Rapid-Setting Anchoring Epoxy ©Roberts Concrete Products (a TCC Materials company) Version 1.0 Precautionary statements: Avoid breathing dust/fume/gas/mist/vapors/spray. Wear protective gloves. Wear eye protection/face protection. Wash thoroughly after handling. Contaminated work clothing must not be allowed out of the workplace. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
PAGE 3
Safety Data Sheet SAKRETE Rapid-Setting Anchoring Epoxy ©Roberts Concrete Products (a TCC Materials company) Version 1.0 Section 4: First Aid Measures Description of first aid measures Inhalation: Supply fresh air and to be sure call for a doctor. In case of unconsciousness, place patient stably in side position for transportation. Skin Contact: In case of contact, wipe excess from skin. Immediately wash skin with soap and water, rinse thoroughly.
PAGE 4
Safety Data Sheet SAKRETE Rapid-Setting Anchoring Epoxy ©Roberts Concrete Products (a TCC Materials company) Version 1.0 Environmental precautions: Do not allow to enter sewers/ surface or ground water. Methods and Material for Containment and Cleaning up Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust), shovel into suitable containers for disposal. Dispose of contaminated material as waste in accordance with federal state and local regulations.
PAGE 5
Safety Data Sheet SAKRETE Rapid-Setting Anchoring Epoxy ©Roberts Concrete Products (a TCC Materials company) Version 1.0 Control parameters Components with limit values that require monitoring at the workplace: CAS No PEL REL TLV glycerol 56-81-5 Long-term value: TLV withdrawn 15* 5** mg/m³ – insufficient mist; *total dust data human **respirable occup. exp. fraction titanium dioxide 13463-67-7 Long-term value: See Pocket Long-term 15* 5** mg/m³ Guide App.
PAGE 6
Safety Data Sheet SAKRETE Rapid-Setting Anchoring Epoxy ©Roberts Concrete Products (a TCC Materials company) Version 1.0 Section 9: Physical and Chemical Properties Information on Basic Physical and Chemical Properties General Information Appearance: Form: Paste. Color: White. Odor: Characteristic. Odor Threshold: Not determined. pH: Not determined. Melting Point: Undetermined. Boiling Point/Boiling Range: Undetermined. Flash Point: >250°C (482°F). Flammability (Solid, Gas): Not applicable.
PAGE 7
Safety Data Sheet SAKRETE Rapid-Setting Anchoring Epoxy ©Roberts Concrete Products (a TCC Materials company) Version 1.0 Conditions to avoid: Avoid high temperatures. Avoid freezing. Incompatible Materials: Reacts with oxidizing agents. Hazardous Decomposition Products: Carbon Monoxide, Carbon Dioxide, Aldehydes, acids. Section 11: Toxicological Information Information on Toxicological Effects Acute Toxicity: Primary irritant effect: Skin Contact: Skin irritant. Eye Contact: Causes serious eye Irritation.
PAGE 8
Safety Data Sheet SAKRETE Rapid-Setting Anchoring Epoxy ©Roberts Concrete Products (a TCC Materials company) Version 1.0 Additional ecological information: General notes: At present there are no ecotoxicological assessments. Results of PBT and vPvB assessment: PBT: Not applicable. vPvB: Not applicable. Other adverse effects: No further relevant information available. Section 13: Disposal Considerations Waste Treatment Methods: Recommendation: Must be specially treated adhering to official regulations.
PAGE 9
Safety Data Sheet SAKRETE Rapid-Setting Anchoring Epoxy ©Roberts Concrete Products (a TCC Materials company) Version 1.0 Section 15: Regulatory Information Safety, health and environmental regulations/legislation specific for the substance or mixture: Sara Section 355 (extremely hazardous substances): None of the ingredients is listed. Section 313 (Specific toxic chemical listings): None of the ingredients is listed.
PAGE 10
Safety Data Sheet SAKRETE Rapid-Setting Anchoring Epoxy ©Roberts Concrete Products (a TCC Materials company) Version 1.0 Cancerogenity categories: EPA (Environmental Protection Agency) None of the ingredients is listed.
PAGE 11
Safety Data Sheet SAKRETE Rapid-Setting Anchoring Epoxy ©Roberts Concrete Products (a TCC Materials company) Version 1.0 OSHA: Occupational Safety & Health TLV: Threshold Limit Value PEL: Permissible Exposure Limit REL: Recommended Exposure Limit Skin Irrit. 2: Skin corrosion/irritation, Hazard Category 2 Eye Irrit. 2A: Serious eye damage/eye irritation, Hazard Category 2A Skin Sens.