User's Manual

page 7 /64
Note d’étude / Technical document : URD1– OTL
5665.3 – 003 / 72238 Edition 01
Document Sagemcom Reproduction et divulgation interdites
Sagemcom document. Reproduction and disclosure prohibited
1. OVERVIEW
1.1 OBJECT OF THE DOCUMENT
The aim of this document is to describe some examples of hardware solutions for developing products around
the SAGEMCOM HiLoNC V2 GPRS Module. Most parts of these solutions are not mandatory. Use them as
suggestions of what should be done to have a working product and what should be avoided thanks to our
experiences.
This document suggests how to integrate the HiLoNC V2 GPRS module in machine devices such as
automotive, AMM (Automatic Metering Management), tracking system: connection with external devices, layout
advises, external components (decoupling capacitors…).
1.2 REFERENCE DOCUMENTS
URD1 OTL 5665.3 001 71927 - HiLoNC V2 technical specification
URD1 OTL 5635.1 008 70248 - AT Command Set for SAGEM HiLo Modules
1.3 MODIFICATION OF THIS DOCUMENT
The information presented in this document is supposed to be accurate and reliable. SAGEMCOM assumes no
responsibility for its use, nor any infringement of patents or other rights of third parties which may result from its
use.
This document is subject to change without notice.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
1.4 CONVENTIONS
SIGNAL NAME: All signal names available on the pads of the HiLoNC V2 module is written in italic.

Specific attention must be granted to the information given here.