Sagab by Elma Volt Stick Bright SEFRAM 12 English Francais EAN: 5706445240104 2 5
Sagab by Elma Volt Stick Bright 2 English The Volt Stick Bright (SEFRAM 12) is a non-contact voltage tester with integrated flashlight, designed to quickly test for the presence of an AC Voltage within close proximity to the user. Without making metallic contact, the instrument will test for an AC voltage on cables, fuses, sockets etc. If the test object is energized, the tip of the instrument will illuminate in bright red light and an acoustic signal will sound.
Sagab by Elma Volt Stick Bright 3 Battery check When the instrument is activated by voltage detection, the red light will flash quickly five times if the batteries need changing. The batteries can be changed by unscrewing the battery cap at the opposite end to the test tip. Then the battery holder can be pulled out of the instrument. Change the batteries, reinsert the battery holder and screw the battery cap back on.
Sagab by Elma Volt Stick Bright 4 armoured cables. Pay special attention when detecting voltage on three phased installations, as the point of detection can be influenced by all three phases, canceling out the electrical field, making voltage detection impossible. In this case, the cable can be carrying voltage, even if the instrument is not indicating the presence of voltage.
Sagab by Elma Volt Stick Bright 5 Francais Le Volt Stick Bright est un testeur de tension sans contact avec une indication lumineuse clignotante, conçu pour effectuer des tests de présence de tension AC par approche du dispositif (une prise par exemple, des portes fusibles,…) et cela sans contact électrique. Si l’objet testé est sous tension, la LED rouge située dans la tête du Volt Stick Bright va s’allumer et un signal sonore sera émis.
Sagab by Elma Volt Stick Bright 6 Test des piles Lorsque l’appareil détecte une tension, en cas de piles faibles, il y aura 5 flashes rapides. Dans ce cas les piles doivent être remplacées. Pour remplacer les piles, dévisser le couvercle du compartiment piles, puis sortir le support piles. Enlever les piles usagées, les remplacer par des piles neuves en respectant la polarité et repositionner le support piles dans l’appareil. Revisser le couvercle du compartiment piles.
Sagab by Elma Volt Stick Bright 20 les autres phases qui peuvent annuler le champ électrique localement. Dans ce cas des conducteurs sous tension peuvent être détectés comme hors tension. Si les piles sont totalement déchargées ou mise à l’envers, l’instrument ne pourra pas détecter une tension. Il est impératif de vérifier voter instrument sur une tension connue avant d’effectuer des mesures. Le nettoyage ne doit s’effectuer qu’avec un chiffon doux et humide et avec du savon pour les mains.
Sagab by Elma Volt Stick Bright 21 SEFRAM INSTRUMENTS 32, rue Edouard MARTEL 42100 SAINT-ETIENNE / FRANCE Tel: +33 ‘ 77 59 01 01 Fax: +33 4 77 57 23 23 Mail: sales@sefram.fr Web: www.sefram.fr Ryttermarken 2, DK-3520 Farum www.elma-instruments.