Installation Guide

ManualsBrandsSafe Grow ManualsHome AutomationHydroponics Garden Monitoring Smart Plug

Safe Grow Automation Device

Quick Guide

Summary of content (10 pages)

PAGE 1
S afe Gro w Aut o m a t i o n D e v i c e Quick Guide
PAGE 2
1A 1B 1C 1D 2A 2B 3A 3B 1A. Camera / Control Module 1B. Camera Battery 1C. USB Power Cable 1D. Ether net Cable 2A. Wall Mount Bracket 2B. Pipe Mount Bracket 3A. Smart Plug ( sold separately ) 3B.
PAGE 3
1. Download and install APP 1. A n d r i o d : Go to Google play and key in “ SafeGrow”. Please download and install APP. 2. Apple IOS : Go to Apple APP store and key in “ SafeGrow”. Please download and install APP. 3. Once installation is complete, launch the SafeGrow APP to complete system setup.
PAGE 4
2. Camera & Phone Pairing 1. Plug USB power cable to the back of the camera. After pressing the power button on the back of the camera, wait for 25 seconds for the camera to activate, the indicator will flash green. When connected to the internet, the flashing green stops and becomes constant. 2. Wifi Setup : With An Ethernet Cable or Smart Pairing 4a. Wifi setup with Ethernet Cable : A - Connect Ethernet cable to the Ethernet port on the back of the Camera.
PAGE 5
3. Camera & Sensor / Smart Plug Pairing on bottom of screen 3. P l a c e S e n s o r / S m a r t P l u g w i t h i n 5 i n c h e s of the camera. 2. Press Add in the Sensors Menu on top of screen. 4. Press button on Sensor / Smart Plug 3 times within 1.5 seconds to pair. 1. Press Sensor Icon to add sensors. 5. Once paring is complete, the device will appear under the sensors menu. Cancel Press button 3 times on the back of sensor or the power button on smart plug within 1.5 seconds to pair.
PAGE 6
4. Sensor settings Add to add sensors or Delete to delete sensors. 1. Press 2. Press to customize sensor names.
PAGE 7
5. Sensor Linkage setting 1. Press and drag to link sensors. 3. Press to adjust linked sensor settings. 2. When smart plug / sensors a re suc c e ssf ully linked, a line connecting two icons will appear .
PAGE 8
6. Scheduling & Notifications 1. Go to System tools in to sync time zone. Press to change scheduling. 3. Use the toggle switch to turn on / off sensors. 4. Click on sensor icon to change notification settings. 2. Press to adjust scheduled sensors. Use the toggle switch to turn on / off schedule.
PAGE 9
7. Camera Settings To customize your camera settings, such as passwords and recording : Press the icon on the bottom right of the screen to select your personalized camera settings.