Instructions / Assembly

* Please make sure that you have all parts indicated before you begin assembly of this item Model# BST3000A

* This item should be assembled on a soft surface to prevent scratching the finish during assembly Product Dimensions:25"Wx21.5"Dx39"H

* This item may require periodic tightening

PIECE LENGTH QUANTITY

A 1X

B 1X

H1 M6*15mm 4X

H2 1X

Allen key

SEAT

Base

Allen bolt

CARE AND MAINTENANCE

Wipe clean with a soft, dry cloth. The seat board can be cleaned with a mild cleaner. Test

the cleaning method on a hidden area before using them over the entire area .

NOTICE

Part List and Hardware List

DESCRIPTION PICTURE

PAGE 1
CARE AND MAINTENANCE Wipe clean with a soft, dry cloth. The seat board can be cleaned with a mild cleaner. Test the cleaning method on a hidden area before using them over the entire area . NOTICE * Please make sure that you have all parts indicated before you begin assembly of this item Model# BST3000A * This item should be assembled on a soft surface to prevent scratching the finish during assembly Product Dimensions:25"Wx21.
PAGE 2
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 10 minutes. Tools Required for Assembly (included): Allen Key Step 1 Align the base (B) onto the bottom of seat(A) as pictured. Step 2 Use allen key “H2” to lock the 4 screws “H1”.