Specifications

4
Connection Quick Setup
Antenna Distribution Amplifier Quick Setup
Connect receiver Antenna 1 input to any RF Output 1 connector on the SWA6SS. Remove the
RF Terminator if necessary.
1
2
Connect any receiver Antenna 2 to any RF Output 2 connector on the SWA6SS.
Receiver
Antenna Distribution Amplifier (SWA6SS)
4
To Extension Antennas
Continue with all remaining receivers. Follow this
diagram for cascading distribution amps.
SWM7000
Series
Receivers
5
Connect antennas (extension or standard from a receiver) to Antenna Inputs.
Antenna Distribution Amplifier (SWA6SS)
Receiver
SWA6SS
Antenna
Distribution
Amplifiers
3
Connect the supplied RF Terminators to all unused RF Outputs. These terminators are caps with a
green collar. Failure to do this may result in poor performance or drop-outs.
Examples show RF Terminators installed on unused Outputs