3" Mini AirCore Fitting Instructions

Fitting Instructions
IMPORTANT: DO NOT clip the internal LookRyt panel to the backplate
until the backplate is fi xed to the wall.
Rytons LookRyt
®
AirCore
®
Range
1. To minimise cracking, drill a pilot
hole and then core drill from both
sides into the cavity.
Use a 127mm dia. core drill for Rytons
127mm (5”) LookRyt AirCore range.
Use a 78mm dia. core drill for Rytons Mini
LookRyt AirCore.
2. Measure the width of the wall.
3. If necessary, cut the tube to
length. Reduce each end of the tube
equally to ensure the external water
baffl e remains central. A maximum
of 63mm may be cut from each end
of a tube containing internal baffl es.
4. Insert the tube into the hole.
5. On the reverse side of the external
louvre grille place a small dab of grab
adhesive onto each of the corner
screw holes.
6. Fix the louvre backplate and the
louvre grille together.
7. Place a thin bead of grab adhesive
around the spigot of the backplate.
8. Insert the louvre grille and
backplate assembly into the exterior
end of the tube.
9. Level the grille before the grab
adhesive sets.
Circular grille models: Place a thin
bead of grab adhesive around the
top ring of the circular grille and  t
into the tube. Ensure the groove
in the grille is aligned with the lug
inside the tube. Insert the grille
and tube assembly into the hole
from inside the property.
DO NOT BLOCK