Operation Manual

ManualsBrandsRWS ManualsAirguns34 Meisterschutze Pro

Break-Barrel Air Ries Caliber Velocity Danger Distance

Schütze™ .177/NA 580/NA fps 400 yds

Model 34 .177/.22 1000/800 fps 575 yds

34 Meisterschütze™ Pro .177/NA 1000/NA fps 575 yds

34 Meisterschütze™ PC .177/NA 1000/NA fps 575 yds

Model 34 P .177/.22 1000/800 fps 575 yds

Pro 34 P .177/NA 1000/NA fps 575 yds

Pro 34 P Compact .177/NA 1000/NA fps 575 yds

Model 350 P Magnum .177/.22 1000/1250 fps 625 yds

Model 350 Magnum .177/.22 1250/1050 fps 625 yds

Model 350 Feuerkraft™ .177/.22 1250/1050 fps 625 yds

Model 350 Feuerkraft™ PC .177/.22 1250/1050 fps 625 yds

Side-Cocking Air Ries

Model 48 .177/.22 1100/900 fps 600 yds

Model 52 .177/.22 1100/900 fps 600 yds

Model 54 .177/.22 1100/900 fps 600 yds

Under-Lever Air Ries

Model 460 Magnum .177/.22 1200/1000 fps 650 yds

Operation

Manual

for

Break-Barrel, Side-Lever,

& Under-Lever Pellet Rifles

Shoots Lead Pellets

ATTENTION: THIS IS A HIGH POWERED AIR RIFLE FOR USE BY PERSONS

16 YEARS OF AGE OR OLDER. READ ALL INSTRUCTIONS BEFORE USING. THE

PURCHASER AND USER SHOULD CONFORM TO ALL LAWS GOVERNING THE USE AND

OWNERSHIP OF AIR RIFLES.

WARNING:

THIS AIR RIFLE IS RECOMMENDED FOR ADULT USE ONLY.

MISUSE OR CARELESS USE MAY CAUSE SERIOUS INJURY OR DEATH. MAY BE

DANGEROUS UP TO 625 YARDS (571 METERS).

Airguns differ in their operation and you are never ready to re any gun

until you are thoroughly familiar with it. Read the following operating

instructions thoroughly prior to operating.

COCKING

LEVER

SIDE-COCKING

Fig. 1b

SCOPE MOUNT

RAIL

SAFETY

BARREL

MUZZLE

FRONT SIGHT

REAR SIGHT

STOCK

BREAK-BARREL

Fig. 1a

TRIGGER

GUARD

TRIGGER

SCOPE MOUNT

RAIL

SAFETY

TRIGGER

GUARD

TRIGGER

BARREL

MUZZLE

FRONT SIGHT

REAR SIGHT

STOCK

UNDER-LEVER

Fig. 1c

UNDER-LEVER

TOP SIDE

LOADING PORT

CAUTION: THIS AIR RIFLE CAN CAUSE SERIOUS INJURY OR DEATH. READ

AND FOLLOW THE INSTRUCTIONS CAREFULLY. DO NOT LOAD A PELLET INTO THE

AIR RIFLE UNTIL YOU ARE READY TO SHOOT. IF YOU DO LOAD A PELLET AND THEN

DECIDE NOT TO SHOOT, REMOVE IT EITHER MANUALLY OR BY SHOOTING THE

AIR RIFLE AT A SAFE TARGET. AN UNLOADED, UNCOCKED AIR RIFLE IS SAFEST.

ACCIDENTS HAPPEN FAST, FATALLY WOUNDING SOMEONE IS A TERRIBLE THING.

PLEASE SHOOT SAFELY.

CAUTION: YOU AND OTHERS WITH YOU MUST WEAR SHOOTING GLASSES

TO PROTECT YOUR EYES. IF YOU WEAR READING GLASSES, YOU MUST WEAR

SAFETY GLASSES INTENDED FOR USE OVER NORMAL OPTICAL READING GLASSES.

Summary of content (5 pages)

PAGE 1
Operation Manual for Break-Barrel, Side-Lever, & Under-Lever Pellet Rifles Shoots Lead Pellets Break-Barrel Air Rifles Schütze™ Model 34 34 Meisterschütze™ Pro 34 Meisterschütze™ PC Model 34 P Pro 34 P Pro 34 P Compact Model 350 P Magnum Model 350 Magnum Model 350 Feuerkraft™ Model 350 Feuerkraft™ PC Caliber .177/NA .177/.22 .177/NA .177/NA .177/.22 .177/NA .177/NA .177/.22 .177/.22 .177/.22 .177/.
PAGE 2
CAUTION: LIKE ALL MECHANICAL DEVICES, AN AIR RIFLE SAFETY CAN FAIL. EVEN WHEN THE SAFETY IS “ON SAFE”, YOU SHOULD CONTINUE TO HANDLE THE AIR RIFLE SAFELY. NEVER POINT THE AIR RIFLE AT ANY PERSON. NEVER POINT THE AIR RIFLE AT ANYTHING YOU DO NOT INTEND TO SHOOT. COCK PRIOR TO OPERATION Make sure the rifle is “ON SAFE”. Pull safety to rearward position — ‘S’ SHOWING (See Fig. 2a). SAFETY “ON” (‘S’ is showing) SAFETY “OFF” (‘S’ is not showing) Fig. 2a Fig.
PAGE 3
(UNDER-LEVER) — IMPORTANT: Before returning the under-lever to its original position, firmly grasp the cocking lever and DEPRESS THE COCKING SAFETY LEVER (See Fig. 4c) located on the right side of the cylinder. Close the cocking lever to its original position. CAUTION: BE CAREFUL TO KEEP FINGERS CLEAR OF COCKING MECHANISM (SEE “PINCH POINTS”, FIG. 4C, 5A and 5B). GRASP THE BARREL FIRMLY AS YOU COCK IT AND CLOSE IT TO PREVENT IT FROM SNAPPING BACK AND POSSIBLY CAUSING INJURY.
PAGE 4
– Windage settings are marked on the sliding scale on the rear sight rail and are controlled by turning the screw (2) on the side (See Fig. 7a). If the rifle shoots to the right: adjust clockwise. If to the left: adjust counterclockwise. (3) (4) – RWS Models 48, 52 and 54 are equipped with an adjustable front sight [(3)-See Fig. 7b]. It can be adjusted by loosening the screw (4), move it by sliding to a lower or higher position. Afterwards retighten the screw. Fig.
PAGE 5
Fig. 10a Fig. 9 BREAK BARREL Fig. 10b SIDE COCKING & UNDER LEVER Mainsprings should be oiled every 1000 shots with six (6) drops of RWS Spring Cylinder Oil (See Figures 10a and 10b). Remember, a little is good – a lot is not better. BARREL: In day to day use, very little dirt or residue will accumulate in the bore. This can be removed by using soft felt RWS Cleaning Pellets. Note: High quality RWS lead pellets not only increase accuracy, they do not leave a lead deposit.