User's Manual

2779 RCU guide-2016-04-05.docx Page 2 of 3
copyright 2015 ruwido austria gmbh – this document is the intellectual property of ruwido austria gmbh and contains confidential information.
reproduction, modification, communication to third parties and any other use is strictly prohibited without prior written accordance of ruwido.
1 LED behaviour during regular operation
stb LED:
 red LED when BLE command is transmitted
 green LED when IR command is transmitted
tv LED:
 green LED when IR command is transmitted
2 manual pairing
 power on STB
 press "On Demand" and "Play/Pause" keys for 3 sec to start pairing process (continues
red flashing of LED)
 LED will stop flashing red if pairing was successful
 plug in the ble2ir dongle to an available USB of Set Top Box in case dongle is used
 to delete pairing from remote control press 4 and 6 keys for 3 seconds
 LED will flash 4 times red if pairing deletion was successful
3 factory settings
 to set remote control back to factory mode press 7 and 9 keys for 3 seconds
 LED will flash 4 times
4 notes
 factory default setting: BLE mode
 pairing information will remain if batteries are being removed / changed
 mode settings will remain if batteries are being removed / changed