SDS

®
AFTERBEFORE
CABINET & TRIM PAINT
SEMI-GLOSS
ONE GALLON (128 FL OZ) 3.78 L
OUTSTANDING FLOW
& LEVELING
SMOOTH
DURABLE FINISH
QUICK DRY
FORMULA
SOAP & WATER
CLEAN UP
BASICS
Cabinet Transformations
®
Basics is an easy-to-use paint that will
transform outdated cabinets and trim. Formulated to provide a
beautiful and durable nish, Basics provides an easy-to-clean
surface that resists dirt, grime, and mildew. Product can also
withstand household chemicals, making it ideal for kitchens,
bathrooms. laundry rooms, and more.
READ ALL INSTRUCTIONS BEFORE BEGINNING PROJECT
INTERIOR USE ONLY, NOT RECOMMENDED FOR EXTERIOR
PAINTING CONDITIONS: Apply when temperature is 50-90°F (10-32°C) and
relative humidity is below 80% to ensure proper drying.
PREPARATION: Surface must be free of any dust, grease, oil, stains, rust,
wax, or any other substances. To ensure proper adhesion thoroughly scrub
cabinet and trim surfaces with a degreaser and prime the surfaces prior to
application of the cabinet and trim paint.
DEGREASING: Thoroughly scrub cabinet and trim surfaces with a
degreaser to remove dirt and grease from existing nishes. Thorough
preparation of the existing surface with a degreaser will produce optimal
results and maximum adhesion.
PRIMING: Use Zinsser Bulls Eye 1-2-3
®
Primer or B-I-N
®
Primer-Sealer to
improve adhesion and help hide stains or tannin bleed that may occur.
Priming is especially important on bare wood cabinet surfaces or when
painting over dark colors.
APPLICATION: Shake or stir well before use. May be applied with a
synthetic (nylon, polyester or blend) bristle brush, roller, pad applicator, or
airless sprayer. For an airless sprayer, follow manufacturer's instructions
when using spray equipment. Use a 0.017" tip at 2000 to 2600 psi. Wear
NIOSH approved respirator and provide adequate ventilation. First apply an
even, light coat of cabinet and trim paint to cabinet frames, rails and cabinet
door backs. Allow to dry 2 hours. Then repeat with a second coat. Allow
second coat to dry 2 hours. After door backs are dry, ip over and repeat the
two coat process on the door fronts, allowing 2 hours dry time between
coats. If applying over a contrasting color, additional coats may be required.
Dry times may vary depending on temperature and humidity levels.
DRY TIME: At normal temperatures, 70°F (21°C), Cabinet Transformations
Basics dries to the touch in 30 minutes and to recoat in 2 hours. Wait at least
12 hours before reinstalling the cabinet doors and 24 hours before normal
usage. Full adhesion and hardness develop in 7 days.
CLEAN UP: Soap and water
COVERAGE: Up to 200 sq. ft., or 80 linear ft., with 2 coats depending on
surface texture, porosity and application.
Max VOC 50 g/L
PRECAUTIONS: Do not take internally. Use only with adequate ventilation.
Do not breathe dust, vapors, or spray mist. Ensure fresh air entry during
application and drying. Close container after each use. Avoid contact with
skin and eyes. Wash thoroughly after handling. First Aid: If you experience
difculty in breathing, leave area to obtain fresh air. If continued difculty is
experienced, get medical assistance immediately. In case of contact,
immediately ush skin with soap and water and eyes with plenty of water.
If swallowed, get medical attention immediately.
KEEP OUT OF REACH OF CHILDREN.
For emergency, call your physician, local poison control center or local
emergency room. For product health information, call: [phone].
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
SATISFACTION GUARANTEED: If you are dissatised with this product,
contact Rust-Oleum Product Support at 800-901-0411 for a product
replacement or full refund of the purchase price. Refer to product number
and batch code.
2x
2 COATS REQUIRED
FOR DURABILITY
SMOOTH &
WASHABLE FINISH
CLEAN UP
SOAP & WATER
COVERAGE UP TO 200 SQ.FT.
WITH 2 COATS
200
HRS
2
2 HRS RECOAT TIME
11 Hawthorn Pkwy., Vernon Hills, IL 60061
800-901-0411 rustoleum.com
Made in USA | Hecho en E.U.A.
FEATHER PILLOW
373700 FEATHER PILLOW
©2021 Rust-Oleum Corporation 374161 0321
0 20066 19331 7
248607
Flexible Packaging & Label Specialists
22790 Heslip
Novi, Michigan 48375
800/748-0209 • 248/335-7440
www.anchorprinting.com
APPROVED
OK TO PROCEED
NOT APPROVED
SEND NEW PROOF
CUSTOMER INITIALS
Please read the proof and specifications carefully. Any errors that are not
acknowledged by the customer are NOT the responsibility of Anchor Printing.
Customer approval is required for print production.
Ink Colors
Specs:
Size: Plastic/Hybrid Gal w/ears Stock: 70# White Litho
21.625” x 7.3125”
Coating: UV
CYAN MAGENTA YELLOW BLACK PMS 477 FEATHER PILLOW
374161 373700 RO CT CABINET TRIM FEATHER PILLOW GAL.indd 1374161 373700 RO CT CABINET TRIM FEATHER PILLOW GAL.indd 1 4/26/21 3:40 PM4/26/21 3:40 PM