Specification

ManualsBrandsRust-Oleum Restore ManualsPaint4 gal. 10X Advanced Saddle Deck and Concrete Resurfacer

RESTORE 10X Advanced Resurfacer FAQs

Page1of11



FEATURES&BENEFITS

Q.IsthenewRestore10XAdvancedResurfacerreplacingthefirstgenerationofRestore10X?

A.Yes,thenewRestore10XAdvancedResurfacerwillreplacethefirstgenerationRestore10Xproduct

instores.Withsuperiorfeaturesandbenefits,Restore10XAdvancedResurfacertakesthedeckcoating

categorytothenextlevel.



Q.WhatenhancementshavebeenmadetotheRestore10XAdvancedResurfacer?

A.Restore10XAdvancedResurfacerhassuperiorweather‐resistance,ultimatewaterrepellency,and

superiorcoveragewitha60%increase(upto40squarefeetwithtwocoatsversus25squarefeet)

comparedtoRestore10X.Restore10XAdvanced

Resurfaceralsofillsincracksupto¼”andisanalgae

andmildewresistantcoating.Furniturecanbereturnedtothesurfacein48hourswithRestore10X

AdvancedResurfacercomparedwith3‐5daysfortheRestore10X.TheRestore10XAdvanced

Resurfaceralsofullycuresinapproxi mately

7dayswhereasRestore10Xtook3‐4weekstofullycure.

Q.WillRestore10XAdvancedResurfacerstillfillvoidsintheconcrete?

A.Yesitwillfillcracksupto¼”.LargerimperfectionsshouldbefilledwithRestoreCrackFillerpriorto

Restoreapplication.



Q.DoesRust‐OleumRestore10XAdvancedResurfacerhavethesamefeel/textureasRust‐Oleum

Restore10X?

A.Yes,Restore10XAdvancedResurfacerhasthesamefeelasRestore10X.

WHERETOUSE

Q.WhatsurfacescanIapplyRestore10XAdvancedResurfacerto?

A.Wood:Restore10XAdvancedResurfacershouldonlybeappliedonhorizontal,structurallysound

woodandmostcompositesurfaces.Somecompositedeckingisengineeredwithmoisturerepellantsor

sealersthatmaypreventproperadhesion.Besuretofollowspecificmanufacturer’srecommendation

beforeapplyingtoanycompositedecking.ForverticalsurfacesuseRestore2XOneCoatSolidStain,

Restore4XDeckCoat,orRestoreSolidAcrylicStain.

Concrete:Restore10XAdvancedResurfacershouldonlybeappliedtohorizontalandstructurally

soundbroomsweptorporousconcrete.

NOTFORUSEON:Smoothorfloatedconcrete,fiberglass,tile,andmetalsurfaces.Thesesurfaceswill

notallowforproperadhesion.Donotuseondriveways,garages,orotherareaswithvehiculartraffic.



Summary of content (11 pages)

PAGE 1
RESTORE 10X Advanced Resurfacer FAQs Page 1 of 11 FEATURES & BENEFITS Q. Is the new Restore 10X Advanced Resurfacer replacing the first generation of Restore 10X? A. Yes, the new Restore 10X Advanced Resurfacer will replace the first generation Restore 10X product in stores. With superior features and benefits, Restore 10X Advanced Resurfacer takes the deck coating category to the next level. Q. What enhancements have been made to the Restore 10X Advanced Resurfacer? A.
PAGE 2
RESTORE 10X Advanced Resurfacer FAQs Page 2 of 11 Q. Can I use Restore 10X Advanced Resurfacer on any concrete surface? A. No. Restore 10X Advanced Resurfacer is for use on broom swept or porous concrete surfaces only. Do not use on smooth or floated concrete. Do not use on driveways, garages, or other areas with vehicular traffic. Q. Can I use Restore 10X Advanced Resurfacer on my driveway or garage? A. No. Restore 10X Advanced is not for slick surfaces such as "floated" or smooth concrete.
PAGE 3
RESTORE 10X Advanced Resurfacer FAQs Page 3 of 11 PREPARATION ON WOOD Q. Do I need to prepare my deck before applying Restore 10X Advanced Resurfacer? A. YES! REGARDLESS OF AGE OR SURFACE CONDITION, FAILURE TO FOLLOW ONE OF THESE PREPARATION METHODS WILL RESULT IN POOR ADHESION AND POSSIBLE COATING FAILURE. NEW AND SEALED WOOD DECKS NEED TO WEATHER AT LEAST SIX MONTHS BEFORE APPLICATION.
PAGE 4
RESTORE 10X Advanced Resurfacer FAQs Page 4 of 11 proceeding. Next sand the entire deck using 50 or 60 grit sand paper. This will open the pores of the wood and create a textured surface that is easier for the coating to adhere to. Step 2 – Clean: Clean the surface using a deck brush and the Restore Deck & Concrete Cleaner. The surface must be completely clean and free of dirt, grease, mildew and organic growth to ensure product bonding and adhesion.
PAGE 5
RESTORE 10X Advanced Resurfacer FAQs Page 5 of 11 and mill glaze prior to application. Follow the PREPARATION instructions on the label to be sure the Restore 10X Advanced adheres properly to the wood. Q. Can Restore be applied directly over a previously painted surface? A. NO. The surface needs to be properly prepared first using either the Restore Deck Start Wood Primer or the Restore Deck Stripper.
PAGE 6
RESTORE 10X Advanced Resurfacer FAQs Page 6 of 11 ALL EXISTING SEALERS, PAINTS, STAINS, WATER REPELLANTS OR OTHER FINISHES MUST BE REMOVED for Restore 10X Advanced to adhere properly. To check for the presence of these, conduct a splash test by sprinkling water on multiple areas of the surface. Check at least 4 areas, or more for larger areas. Be sure to check both high traffic areas such as walkways and non‐traffic areas. If the water absorbs rapidly into the surface, the surface is ready to be coated.
PAGE 7
RESTORE 10X Advanced Resurfacer FAQs Page 7 of 11 above. If water continues to bead, the floor should not be coated. If water soaks into the surface, you may proceed to coat the floor as directed. Q. My concrete patio already has paint on it. Can I apply this over another coating? A. You cannot apply Restore 10X Advanced Resurfacer directly over another coating. ALL EXISTING SEALERS, PAINTS, STAINS, WATER REPELLANTS OR OTHER FINISHES MUST BE REMOVED for Restore 10X Advanced Resurfacer to adhere properly.
PAGE 8
RESTORE 10X Advanced Resurfacer FAQs Page 8 of 11 STEP 6: Allow second coat to dry 24 hours before light foot traffic and 48 hours before replacing furniture. If surface is tacky or soft, allow extended drying time before putting furniture or other heavy objects back in place. Full cure to a hard finish will take approximately 7 days. Q. How many coats of Restore 10X Advanced Resurfacer do I need to apply? A. TWO. The first coat will go on to fill in cracks and do other minor repairs.
PAGE 9
RESTORE 10X Advanced Resurfacer FAQs Page 9 of 11 Q. Can I add water to Restore to thin it? A. NO. Q. Do I really need to use the Restore Honeycomb Roller when applying Restore 10X Advanced? A. YES. The honeycomb roller cover is specifically designed to work with the thickness and texture of the Restore 10X Advanced product. Other traditional paint roller covers leave a splotchy uneven coat. Q. I am applying Restore 10X Advanced with the textured roller, why is the product splattering? A.
PAGE 10
RESTORE 10X Advanced Resurfacer FAQs Page 10 of 11 Q. How long before furniture can be placed on the deck after the deck has been coated? A. 48 hours. We recommend that deck furniture have rubber tipped legs to avoid scraping the deck surface. Avoid dragging furniture on the Restore coated surface. It will abrade the surface and wear down the coating in the areas where dragging has occurred. CLEAN UP, STORAGE & DISPOSAL Q. How do I clean up after application? A.
PAGE 11
RESTORE 10X Advanced Resurfacer FAQs Page 11 of 11 Q. Will Restore 10X Advanced Resurfacer become hot in the sun? A. Yes. Just like any painted surface, Restore will become hot when exposed to the sun. If you are concerned about surface temperatures, or are applying Restore to a surface that has high exposure to sun (pool decks, sun decks, etc.), we recommend choosing our lightest colors, such as Beach or Cape Cod Gray. Lighter colors reflect light, while darker colors attract and absorb it.