Use and Care Manual

TECHNICAL DATA ESH-04
EPOXYSHIELD
®
HEAVY DUTY DEGREASER
Form: GDH-354
Rev.: 050514
1
.DESCRIPTION AND USES .
EpoxyShield
®
Heavy Duty Degreaser is formulated to
clean grease and oil stains on concrete surfaces prior to
painting, staining, and sealing. Heavy Duty Degreaser is
ideal for use on garage floors, basements, concrete
driveways, sidewalks, porches, patios, and stairs.
PRODUCTS .
SKU Description
21438 Heavy Duty Degreaser
PACKAGING .
1 quart plastic bottle
PRODUCT APPLICATION .
SURFACE PREPARATION
Wipe up excess oil and grease spills. Scrape and sweep
away dirt and loose contaminants on surface.
.PRODUCT APPLICATION .
MIXING
Use EpoxyShield Heavy Duty Degreaser at full strength to
clean tough stains. Dilute 1:4 (1 quart [32 oz.] Degreaser
in 1 gallon [128 oz.] of water) for general purpose cleaning.
To keep your painted floor looking great, dilute 1:16 (1 cup
[8 oz.] Degreaser in 1 gallon [128 oz.] of water). Stir
diluted solution thoroughly. Avoid splashing.
APPLICATION
Wet the surface first by spraying with a garden hose.
Apply the product full strength for tough stains or diluted
for general purpose cleaning on bare concrete or painted
floors. Thoroughly scrub the surface with a stiff bristle
brush or broom. Wait 10-15 minutes to allow the
Degreaser to lift stains from the surface. Wipe up excess
Degreaser with rags or towels to keep the contaminants
from spreading. Rinse thoroughly with fresh water. Repeat
applications may be necessary for difficult stains. Remove
excess water with a squeegee or mop.
STORAGE and DISPOSAL
Store at room temperature. Keep container closed when
not in use. Dispose of container and/or unused contents in
accordance with local, state, and federal regulations.
Protect from freezing.