Use and Care Manual

Rubberseal™ White
Flexible, Chemically Resistant, Seamless Rubber Membrane
Description
Rubberseal™ roll or trowel grade is a water based, low VOC (Volatile Organic Compounds),
cold applied seamless rubber membrane specifically designed for protecting and waterproofing
suitable substrates in corrosive environments, including applications in sewage and manhole
rehabilitation. Offering exceptional chemical resistance, puncture resistance and excellent
elongation, Rubberseal™ is a high-end waterproofing membrane that exhibits tremendous bond
strengths. Rubberseal™ installs easily by roll or trowel, quickly developing excellent film
strength. Rubberseal™ roll and trowel grade provide a sure seal, the choice for a durable
waterproof solution in the most demanding service applications.
Features & Benefits
 Excellent elongation to completely bridge and seal cracks that would allow penetration of
chemicals into the surface / structure.
 Can be applied in as little as 24 hours after removal of concrete forms.
 Excellent chemical resistance, resistant to hydrogen sulfide attack.
 Tremendous tensile strength and puncture resistance.
 Bonds to most of construction materials.
 Water based, non-toxic, non-flammable, solvent free and odorless, Rubberseal™ Spray,
Roller Grade or Trowel Grade will not contaminate the waste stream and is safe for
installation in confined areas.
 Resistant to aging, and UV exposure
 Low VOC’s
 Modified formulas for spray-on applications
LEED Points Contribution LEED Points
MR Credit 5, Regional Materials 10% and 20%* 1-2 points
EQ Credit 4.2, Low-Emitting Materials: Paint & Coatings 1 point
*Using this Inflow’s product may help contribute to LEED certification of projects in the categories shown
above. Points are awarded based on contributions of all project materials.
Where to Use
 Properly prepared sound and stable surface that have had the forms removed for at
least 24 hours, and are surface dry.
 Use in conjunction with the Spray Grade of Rubberseal™ to complete waterproofing
applications in areas inaccessible to the spray application.
 Use with Inflow Geotextile to effect details (out of plane joints) or repairs in new or
existing applications of Rubberseal™ Roll-on or Trowel. Use to waterproof and coat
surface in sewage and drainage systems to prevent the deterioration caused by
hydrogen sulfide attack.
 Use to waterproof surface wherever a durable, chemical resistant coating is desired.
 Use to protect steel from corrosive elements.
 Use in fresh & saltwater fountains, reflecting pools, wastewater treatment plants, canals,
drainage systems, foundations, concrete planters, catch basins and more.
Limitations
 Surface and ambient temperatures must be between 50F – 95F (10C – 35C)
 Do not apply in rain, or if rain is expected within 6 hours.
 Verify surface is free of bond-inhibiting or bond-breaking materials such as curing
compounds and dust.
 Repair all cracks and seal surface from running water and contaminants prior to
application
 Do not apply over unprimed galvanized steel.
 Contact Technical Services for applications where the product will be exposed to
chlorinated water.
Suitable Substrate
► Sound, Stable Concrete ► Woods and Plastic