Specification
Revised: July 16, 2020 Toll Free #: 1 (877) 713-1899
Email: sales@rubberking.com
PRODUCT SPEC REPORT
Rubber King PRO SERIES
Product Information
Composition
Configuration
Mat Size
Sq. ft. / Mat
Edge Finish
Available Thickness
Manufactured
Recycled Rubber
Pallet
38” x 38”
10.02
Square
8mm, 10mm
North America
EPDM Rubber
Pallet
37” x 37”
9.2
Interlocking
8mm, 10mm
Polyurethane Binder
Case
24” x 24”
4
Interlocking
6mm, Custom
Installation
Edge Finish
Installation Type
Layout
Square
DinoGrip adhesive
Ashlar/Brick
pattern
Interlocking
Loose lay
Ashlar/Brick
pattern
Maintenance
Cleaner
Cleaning
Cleaning Method
DinoClean
Vacuum or sweep
Microfiber map
Auto Scrubber
Sustainability
Performance
Standard
Requirement
Performance vs. Requirements
TVOC Range
CDPH/EHLB v1.2-2017 (California Section 01350)
<0.5 mg/m³
Pass
Low Emitting Adhesives
SCAQMD Rule #1168
Less than 50 g/L
Pass, 37 g/L
Recycled Content
Black: 87% Post-Consumer, 0.0% Post-Industrial, 87.0% Total Recycled Content
Color: 74% Post-Consumer, 41.2% Post-Industrial, 75.2% Total Recycled Content
Testing
Description
Test Method
Result
Taber Abrasion
ASTM C 501
0.8% wt. Loss
Static Coefficient of Friction
ASTM D 2047
Dry 1.04; Wet 1.05
Hardness Shore A Durometer
ASTM D 2047
64 - 65 Indentation
Density Foam Test
ASTM D 3676
66.0 lbs/cu. ft.
Compression Set Under Force
ASTM D 395B
96.3% Recovered
Tensile Strength
ASTM D 412
290.2 lbs/sq. in.
Material Emissions VOC
ASTM D 5116
Pass
Impact Sound Transmission
ASTM E 492
8mm IIC 59
Electrical Resistance Surface to Surface
ASTM F 150
5.4 x 1010 ohms (average)
Electrical Resistance Surface to Ground
ASTM F 150
2.3 x 1010 ohms (average)
Short Term Indentation
ASTM F 1914-98
0.025-inch (6.0%) Loss
Residual Indentation
ASTM F 1914-98
0.007-inch (1.7%) Loss
Static Load (125 lbs)
ASTM F 970-87
0.000 inch (0.0%) residual compression
Chemical Resistance
ASTM F 925
No Change
Mildew Resistance
ASTM G 21
No Mildew after 14 days
Warranty
5-year Limited Commercial Warranty when installed in accordance with Rubber King’s Installation Guidelines.
Product