Manualshelf

User's Manual

ManualsBrandsRTX Hong Kong ManualsElectronicsCordless DECT Handset
41424344454647484950
Error! Use the Home tab to apply Titre 1 to the text that you want to appear here.
8AL90387ENAAed0a
46 /61
8.2 Registering the telephone on other systems
The telephone can be registered on several systems (maximum of 4).
Note: the input is usually reserved for use with your main Alcatel-Lucent system. You can select the other
inputs to register the telephone under another system (Alcatel-Lucent or other system).
8.2.1 To make a new registration, when the telephone has already been registered on one or
more systems, proceed as follows:
1. Prepare your system for registration (see the system installation manual or consult your installation
manager).
2. When the system is ready:
• Access MENU.
• Install
• Register
• Enter the PIN Code.
• Apply.
• Select a system.
• Enter PARK code (Enter nothing if not mandatory).
• Apply.
• Enter access code (Enter nothing if not mandatory).
• Apply
• Select Power mode.
• Enhanced Security
• Yes / No
Call from encrypted system to un-encrypted system is accepted (yes) or rejected (no)
Launch subscription.
• Return to idle.
• If the registration operation runs correctly (Subscription accepted), the telephone is ready for use, and
the radio coverage icon appears.
• If the registration operation has not been successful, the station proposes launching the subscription
again.
• Depending on the type of system concerned, registration may require one or more additional operations
on the system.
During registration phase, to improve security and optimize registration in a multi-system environment, the
handset enforces a minimum signal strength level to accept to register to a base station. To achieve the
conditions, it is recommended to perform registration in a place where a base station is in direct visibility
within a 20 m range. If base station is not visible the range shall be lowered.
During registration phase in a multi-system environment, all systems are scanned without priority. The
system is selected when the signal strength is above a certain level and registration matches.