User's Manual

20
W and WIP Panel www.videofied.com
3. W panel features guide
When user disarms the system, the keypad indicates the last event.
In case of the user needs to read the full log file, use the keypad to go in EVENT LOG,
press
OK or YES on SELECT LAST EVENTS and use arrow to list the events.
3.6 Read the event log
Press OK or YES for more information about an event
EVENT
LOG
SELECT LAST
EVENTS
OK or YES
15/10/13 11:29
MODIFIED PARAMET
OK or YES
15/10/13 11:10
SYSTEM DISARMED
3.7 Golden rules
Area 1 device are delayed by default (Area mode parameter
set as Auto). When you register a keypad or a badge reader
into an area set as Auto, that area will automatically be delayed.
Never position a panel next to a high voltage electrical
cabinet. The interference will affect radio and 2G3G
performance.
Press
CLR to erase a typing mistake.
Never register the same device twice (delete from the system
first).
The panel can register of up to 25 devices of all types,
including the keypad and the keyfobs.
Follow the Motionviewer installation instructions. Consider the
infrared field of detection when installing the Montionviewer
cameras, in order to protect goods or an entry point instead
of a zone.
1.
2.
3.
4.
5.
6.
Do not fix the keypad at the beginning of the installation as it
will need to be portable during programming.
Always clean the lens of the cameras after the installation. Use
a clean, dry cloth, taking care not to exert pressure on
the lens.
Internal components are fragile, be careful opening or closing
the panel.
LCD screen goes dark after 30 seconds of inactivity, press an
arrow or numeric key to light it up.
Infrared detectors should never be installed in stairs or close
to stairs (false alarm risks).
A colon display [:] means that the parameter can be changed.
Press
OK / YES to display the colon
7.
8.
9.
10.
11.
12.
INSTALLATION
MANUAL