User`s guide

Chapter 2: Getting Started
8 Alpha 600/601 User’s Guide
the CD version of the software is already installed on your PC before you
download and install any upgrades.
RegisterLink software instructions are separate from this manual. The
RegisterLink instruction manual is on the CD that contains the software.
An updated and revised version of the instruction manual accompanies
any newer version of the software that is downloaded from our web site.
Please refer to the RegisterLink instruction manual for all software related
operational instructions and assistance.
Setting the Language
Before you program the cash register, you need to specify a language if
you do not want to use English. You can select English, Spanish, French,
or German.
Changing the language changes the words you and the customer see on
the display. For more information about the prompts that appear, see
Language Table on page 146.
Note
If you start programming the cash register and then set the language, you
will lose all your programming changes.
To set the language
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 Using the round Number keys, press 19. Press the round Number key to
select the language you want. The options are:
3 Press the Void key. The language your cash register shows on the display
is set.
4 If you want to the cash register to show a language other than English,
see Programming Flag Options on page 65 to specify the language you
want. If you set the language after you program more options, all the
custom programing you add is erased.
You are ready to start programming the cash register.
Note
Before you continue, see page 65 for other settings you may want to use.
English 0
Spanish 1
French 2
German 3