Mowers Owners Manual REEL MOWER 300361, 300433

ManualsBrandsRover ManualsLawn Mower300361

Warranty Conditions

AustrAliA & New ZeAlANd ONly

For your record:

Dealer’s Name: .............................................................................................................

Dealer’s Address: ..........................................................................................................

Dealer’s Phone No: .......................................................................................................

Product Model No: .......................................................................................................

Product Serial No: .........................................................................................................

Date of Purchase: ..........................................................................................................

Rover Mowers Limited reserves the right to make changes of and add

improvements upon its product at any time without notice or obligation.

The Company also reserves the right to discontinue manufacture of any

product at its discretion at any time.

Rover Mowers Australia Rover Mowers New Zealand

PO Box 1235 East Tamaki,

Eagle Farm. Qld 4009 Auckland.

Australia. New Zealand.

This Rover Owners Manual has been printed on 100% Australian

recycled paper as a sign of Rover Mowers’ commitment to Greening

Australia and New Zealand.

S1943676 © Copyright 11/2005

Rev. C.

Rover Mowers Limited warrant that this machine is free from

defects in material and workmanship. This warranty is limited to

making good or replacing any part which appears upon inspection

by the manufacturer or his agent to be defective in material or

workmanship.

The engine used to power this machine is warranted by the

manufacturer whose warranty statement has been included with

the machine. As the warranty for the engine may differ from the

warranty for the other components, you are advised to read the

engine manufacturer’s warranty carefully

For other items this warranty shall apply for a period of 12 months

from the date of purchase except for products used commercially

where the warranty is limited to 90 days.

This warranty does not obligate the manufacturer, his agents

or dealers to bear the transport costs incurred in the repair or

replacement of any defective part.

Online Warranty Registration - www.rovermovers.com.au

This warranty excludes fair wear and tear, or any damage caused

by misuse or abuse. Parts such as blades, blade bolts, v-belts and

spark plugs, which can be subjected to use beyond their normal

intended working capacity are also excluded.

This warranty is void if parts other than genuine have been used or

if repairs or alterations have been made without the manufacturer’s

written authority.

The above warranty does not exclude any condition or warranty

implied by the Trade Practices Act 1974 or any other relevant

legislation which implies any condition which cannot be

excluded.

REMEMBER:

PROOF OF PURCHASE IS THE RESPONSIBILITY OF THE OWNER AND

IS NECESSARY PRIOR TO WARRANTY WORK BEING UNDERTAKEN.

REPAIRS MUST BE CARRIED OUT BY AN AUTHORISED ROVER

DEALER /SERVICE AGENT AND GENUINE SPARE PARTS MUST BE

USED OR YOUR WARRANTY WILL BE VOID.

A.B.N. 11 000 257 303

ISO 9001 Lic 10168

Standards Australia

RECYCLED PAPER

GWAIL GROUP

PRINTED IN AUSTRALIA

Owners Manual

QUEEN

30” REEL MOWER

3676 Queen 30 Reel Mower.indd 1 22/11/2005 4:27:30 PM

Summary of content (28 pages)

PAGE 1
Warranty Conditions Owners Manual Australia & New Zealand Only Rover Mowers Limited warrant that this machine is free from defects in material and workmanship. This warranty is limited to making good or replacing any part which appears upon inspection by the manufacturer or his agent to be defective in material or workmanship. The engine used to power this machine is warranted by the manufacturer whose warranty statement has been included with the machine.
PAGE 2
SAFETY INSTRUCTIONS * A mower user must be in good physical condition and mental health and not under the influence of any drug or alcohol which might impair vision, co-ordination or judgement. * When starting, do not wrap the starter rope around your hand. Do not allow the starter cord to snap back. Return the starter grip slowly to allow the cord to rewind properly. * Strictly follow the operator instructions before attempting to start engine. * Do not use a mower when tired or fatigued.
PAGE 3
MAINTENANCE AND ADJUSTMENT 30” QUEENTM ELECTRIC MOWER 2 SPEED OPERATION Normal Speed _ 4.9km/p.h 127 cuts per metre. Low Speed _ 3.2km/p.h 183 cuts per metre. SPEED CONTROL To change speed, stop motor and move ribbed sliding sleeve (A) inwards to engage normal speed or outwards for low speed as required. It may be necessary to twist the sleeve or countershaft backwards and forwards slightly whilst sliding the sleeve position to allow the gear teeth to line up and mesh fully.
PAGE 4
HEIGHT ADJUSTMENT – To cut lower, slacken quadrant clamp bolt nuts (1), also the lower adjusting screw nut (2). Then tighten top adjusting screw nut (3) until desired height of cut is obtained. To cut higher, reverse procedure. Re-tighten all nuts after desired setting is obtained. The indicator marks on the quadrant are an indication of the cutting height, but to set the height of cut accurately the setting gauge must be used. Refer setting gauge instructions. 30” QUEENTM - SPARE PARTS LIST ITEM PART No.
PAGE 5
TO CHECK THE MOWER FOR ALIGNMENT – Your mower is designed to produce the perfectly flat cut that is required for a top quality green. Ridging or stepping between cuts means that the height of cut is unevenly set or more likely, that the mower is “out of square” – That is, the rear roller is not perfectly in line with the cutting edge of the bottom blade. This condition can be brought about by transport of the mower or undue stress caused by bumping while moving from the equipment shed onto the green.
PAGE 6
REVERSING CUTTER – A feature of this machine is that the cylinder may be easily removed, reversed end for end and replaced. This provides a new keen cutting edge. If the bottom blade is badly worn, this should be replaced at the same time that the cutting cylinder is reversed or replaced. To withdraw cutter from machine, first remove cutter chain (7), sprocket (8) and grass deflector (9), refer illus. Page 1.
PAGE 7
LUBRICATION – Pre-lubricate, sealed ball races are fitted to the cutter, drum shaft, countershaft and front roller. No further lubrication is necessary to these 8 races. Drums are fitted with special self-lubricating bushes and do not require lubrication. Driving Chains – grease or medium oil used sparingly. Gear Box – use medium oil at points B, C and D. Use grease sparingly on gear teeth. FRONT ROLLER SCRAPER – Loosen clamp bolt each end, adjust scraper to just clear the roller and re-tighten clamps.
PAGE 8
30” QUEENTM - SPARE PARTS LIST 7 3676 Queen 30 Reel Mower.indd 8 ITEM PART No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 305390 305445 173024 163029 305496 305470 301970 A03285 305437 A12106 A01080 A02060 A02110 A02034 2501116 2501054 A02030 2531120 A02049 A02223 DESCRIPTION Handle assembly Cord carrier assembly Cord grip Cord grip ring Clutch control rod Clutch lever Chain cover case Chain cover knob Cord carrier bar Decal- warning Spring pin Nut- 3/8” unf.hex. Setscrew- 3/8” x 1” unf.
PAGE 9
30” QUEENTM - SPARE PARTS LIST 19 3676 Queen 30 Reel Mower.indd 9 ITEM PART No.
PAGE 10
30” QUEENTM - SPARE PARTS LIST 9 3676 Queen 30 Reel Mower.indd 10 ITEM PART No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 305648 301065 305664 305701 305920 302076 302084 305728 305752 2051907 A02001 A02146 A02060 A02034 2321182 A02031 A02085 A02004 DESCRIPTION Deflector assembly Deflector strip assembly Scraper trough assembly Trough pivot bar Motor table Table seat block Seat block clamp Trough cover plate assembly Trough support Metal thread- 1/4” x 1/2” round head Nut- 1/4” unc.hex.
PAGE 11
30” QUEENTM - SPARE PARTS LIST 17 3676 Queen 30 Reel Mower.indd 11 ITEM PART No.
PAGE 12
30” QUEENTM - SPARE PARTS LIST 11 3676 Queen 30 Reel Mower.indd 12 ITEM PART No.
PAGE 13
30” QUEENTM - SPARE PARTS LIST ITEM 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 15 3676 Queen 30 Reel Mower.indd 13 PART No.
PAGE 14
30” QUEENTM - SPARE PARTS LIST 13 3676 Queen 30 Reel Mower.indd 14 ITEM PART No.
PAGE 15
30” QUEENTM - SPARE PARTS LIST 13 3676 Queen 30 Reel Mower.indd 14 ITEM PART No.
PAGE 16
30” QUEENTM - SPARE PARTS LIST ITEM 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 15 3676 Queen 30 Reel Mower.indd 13 PART No.
PAGE 17
30” QUEENTM - SPARE PARTS LIST 11 3676 Queen 30 Reel Mower.indd 12 ITEM PART No.
PAGE 18
30” QUEENTM - SPARE PARTS LIST 17 3676 Queen 30 Reel Mower.indd 11 ITEM PART No.
PAGE 19
30” QUEENTM - SPARE PARTS LIST 9 3676 Queen 30 Reel Mower.indd 10 ITEM PART No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 305648 301065 305664 305701 305920 302076 302084 305728 305752 2051907 A02001 A02146 A02060 A02034 2321182 A02031 A02085 A02004 DESCRIPTION Deflector assembly Deflector strip assembly Scraper trough assembly Trough pivot bar Motor table Table seat block Seat block clamp Trough cover plate assembly Trough support Metal thread- 1/4” x 1/2” round head Nut- 1/4” unc.hex.
PAGE 20
30” QUEENTM - SPARE PARTS LIST 19 3676 Queen 30 Reel Mower.indd 9 ITEM PART No.
PAGE 21
30” QUEENTM - SPARE PARTS LIST 7 3676 Queen 30 Reel Mower.indd 8 ITEM PART No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 305390 305445 173024 163029 305496 305470 301970 A03285 305437 A12106 A01080 A02060 A02110 A02034 2501116 2501054 A02030 2531120 A02049 A02223 DESCRIPTION Handle assembly Cord carrier assembly Cord grip Cord grip ring Clutch control rod Clutch lever Chain cover case Chain cover knob Cord carrier bar Decal- warning Spring pin Nut- 3/8” unf.hex. Setscrew- 3/8” x 1” unf.
PAGE 22
LUBRICATION – Pre-lubricate, sealed ball races are fitted to the cutter, drum shaft, countershaft and front roller. No further lubrication is necessary to these 8 races. Drums are fitted with special self-lubricating bushes and do not require lubrication. Driving Chains – grease or medium oil used sparingly. Gear Box – use medium oil at points B, C and D. Use grease sparingly on gear teeth. FRONT ROLLER SCRAPER – Loosen clamp bolt each end, adjust scraper to just clear the roller and re-tighten clamps.
PAGE 23
REVERSING CUTTER – A feature of this machine is that the cylinder may be easily removed, reversed end for end and replaced. This provides a new keen cutting edge. If the bottom blade is badly worn, this should be replaced at the same time that the cutting cylinder is reversed or replaced. To withdraw cutter from machine, first remove cutter chain (7), sprocket (8) and grass deflector (9), refer illus. Page 1.
PAGE 24
TO CHECK THE MOWER FOR ALIGNMENT – Your mower is designed to produce the perfectly flat cut that is required for a top quality green. Ridging or stepping between cuts means that the height of cut is unevenly set or more likely, that the mower is “out of square” – That is, the rear roller is not perfectly in line with the cutting edge of the bottom blade. This condition can be brought about by transport of the mower or undue stress caused by bumping while moving from the equipment shed onto the green.
PAGE 25
HEIGHT ADJUSTMENT – To cut lower, slacken quadrant clamp bolt nuts (1), also the lower adjusting screw nut (2). Then tighten top adjusting screw nut (3) until desired height of cut is obtained. To cut higher, reverse procedure. Re-tighten all nuts after desired setting is obtained. The indicator marks on the quadrant are an indication of the cutting height, but to set the height of cut accurately the setting gauge must be used. Refer setting gauge instructions. 30” QUEENTM - SPARE PARTS LIST ITEM PART No.
PAGE 26
MAINTENANCE AND ADJUSTMENT 30” QUEENTM ELECTRIC MOWER 2 SPEED OPERATION Normal Speed _ 4.9km/p.h 127 cuts per metre. Low Speed _ 3.2km/p.h 183 cuts per metre. SPEED CONTROL To change speed, stop motor and move ribbed sliding sleeve (A) inwards to engage normal speed or outwards for low speed as required. It may be necessary to twist the sleeve or countershaft backwards and forwards slightly whilst sliding the sleeve position to allow the gear teeth to line up and mesh fully.
PAGE 27
SAFETY INSTRUCTIONS * A mower user must be in good physical condition and mental health and not under the influence of any drug or alcohol which might impair vision, co-ordination or judgement. * When starting, do not wrap the starter rope around your hand. Do not allow the starter cord to snap back. Return the starter grip slowly to allow the cord to rewind properly. * Strictly follow the operator instructions before attempting to start engine. * Do not use a mower when tired or fatigued.
PAGE 28
Warranty Conditions Owners Manual Australia & New Zealand Only Rover Mowers Limited warrant that this machine is free from defects in material and workmanship. This warranty is limited to making good or replacing any part which appears upon inspection by the manufacturer or his agent to be defective in material or workmanship. The engine used to power this machine is warranted by the manufacturer whose warranty statement has been included with the machine.