USER MANUAL Bidet Seat
Contents Thank you for you purchasing our washing cover plate.
Safety notes Read the safety instructions carefully before use so as to properly use the product. Note the following warnings relevant to the safety. Do not place heavy objects on the toilet seat or the toilet cover Do not disassemble, repair and modify products by without authorization. Do not place this product in direct sunlight. Do not bend or twist the water supply hose. Do not lean against the toilet lid when in use The room temperature of toilet shall be above 0°C.
Product description cover seat Nozzle Knob Water supply hose joint 2 Disassembly button Product dimension drawing 290 434-490 370 132-178 508 60 203 374 size: mm
Component description 1.Cover plate 2. Installation template 3.Fixation part Connecting bolt (2) Adjustment sheet (2) Plastic TAB(4) 3 Fixing plate 4.Adapter Rubber bushing(2) 5. Water inlet hose 6.
Installation steps Installation tools Cross screwdriver Monkey wrench Barrel and rag Attention before installation 1.Water pressure range: 0.1-0.75MPa, please follow the instructions. 2.Corner valves shall be located close to the location where this product is installed and disassembled. 3.Please use the braided hose that comes with the product to prevent water leakage. 4.When installing braided hose,be careful to prevent the black gasket falling out. Installation Procedure 1.
Installation steps 7.Install braided hose； European ceramic ①When the ceramic is similar to the figure above,we suggest connecting the straight end of the hose to the cover 5 American ceramic ②When the ceramic is similar to the figure above,we suggest connecting the elbow end of the hose to the cover 8.
Installation steps 9.Open the vavle to check water leakage； Prohibition 10.Turn on the knob to check whether the nozzle is protruding； 1. It is strictly prohibited to move the product from the toilet cover, otherwise easy to cause mechanical failure. 2. It is strictly prohibited to connect hot water above 40℃ and cold water that may lead to icing.
Cleaning and maintenance Manual cleaning of spray tube - Gently pull out the nozzle and dip the neutral detergent with a soft cloth, sponge or small brush. - Gently support the nozzle, wipe the spray tube and nozzle. Clean filter screen 2 Braided hose A A Filter screen Tips: - Make sure that the corner valve close off before you clean the filter screen； - Clean the filter screen when the water flow is less than normal hours.
Product technical specification Items Description Model LB-TL-BSV02 Water supply pressure 14.5 ~ 108.7 PSI Water supply temperature 41~ 95 °F Ambient temperature 0 ~104 °F Net weight About 4.4 lb Package dimensions 20.6 * 15.5 * 3.
Warranty Card To dear customers: Thank you for choosing our E-bidet! If any problem occurs during use, please simply remove and check the problems pursuant to the user's manual. When you cannot remove such problems, contact your local supplier or call the service hotline. I. Information: Customer information Customer name Address TEL Dealer information Name TEL Model Purchase date Y M D Product series number Warranty One-year free warranty since period the purchase date II.
