Programming Manual
Table Of Contents
- 1. Introduction
- 2. Technical Specifications
- 3. Installation
- 4. Operation
- 5. Programming
- 5.1 Entering the Programming Mode
- 5.2 Exiting the Programming Mode
- 5.3 Changing the Open Code
- 5.4 Changing the Auxiliary Code
- 5.5 Changing the Programming Code
- 5.6 Changing the Normal/Secure Code
- 5.7 Changing the Normal/Bypass Code
- 5.8 Setting Fail Safe/Secure Operation
- 5.9 Setting Auxiliary Modes
- 5.10 Setting the Lockout Feature
- 5.11 Setting the Backlight Behavior
- 5.12 Enrolling Primary and Secondary Codes
- 5.13 Deleting Primary and Secondary Codes
- 5.14 Relay Codes Assignment
- 5.15 Changing PIN Code Length/Factory Default Settings
- 5.16 Replacing a Programming Code
- 5.17 Replacing a Normal/Secure Code
- A. Declaration of Conformity
- B. Limited Warranty
Technical Specifications
AC-F/G4x Series Installation and Programming Manual 15
AC-F43
AC-F44
AC-G43
AC-G44
Size (H x W x D) 120.9 x 71.1 x 29.7
mm (4.7 x 2.8 x 1.2 in.)
135.4 x 44.2 x 28.5
mm (5.3 x 1.7 x 1.1 in.)
Weight 244 g (8.6 oz) 178 g (6.3 oz)
* Measured using a Rosslare proximity card or equivalent. Range also
depends on electrical environment and proximity to metal.