INSTALLATION AND CARE GUIDE STACK LED MIRROR CABINET E015612 E015615
STACK LED Mirror Cabinet Model : E015612 Designed By: PHOENIX DESIGN | GERMANY E015615 PRE-INSTALLATION Tools Required ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENSED ELECTRICIAN. WARNING: To reduce the risk of electrical shock, shut off power before wiring the cabinet. CAUTION: Requires 120V 20AMP circuit. CAUTION: The LED mirror must be wired to a GFI (ground fault interrupter) circuit breaker when used in bathrooms and all other locations required by the national electric code.
STACK LED Mirror Cabinet Model : E015612 Designed By: PHOENIX DESIGN | GERMANY E015615 INSTALLATION Step 1: Determine the ideal location of your new LED mirror. Figure 1. Mark the locations for the long screws to hang the wall cleat. NOTE: It is highly recommended the location has at least two studs. Front notch the studs to install a 2x4 horizontal beam for added stability. Step 2: Cut an opening in the wall and connect the electrical wires to the housing.
STACK LED Mirror Cabinet Model : E015612 Designed By: PHOENIX DESIGN | GERMANY E015615 PRODUCT CARE AND MAINTENANCE The fine furniture finish of your new vanity, mirror or other bathroom accessories are designed to protect against normal home use. With proper care, your product will provide years of use and beauty in your home. General Care Tips • Test cleaning product on small, discrete area prior to applying to entire surface.
STACK LED Mirror Cabinet Model : E015612 Designed By: PHOENIX DESIGN | GERMANY E015615 Glass Surfaces • Clean up any spills or liquids immediately. Never allow liquids of any kind to remain on surface as it may form buildup and deposits. • DO NOT use abrasive brushes, sponges or cleaners as they may scratch and damage the surface. • Do not use oil or any oil-based cleaners on the glass as this may remove the frosted finish.
160823 40650 Encyclopedia Circle T 510.713.1188 Fremont, CA 94538 F 510.657.9388 ronbow.eu | ronbow.
