Instructions / Assembly

Technical Data: PRO-543

Updated: 10/26/17

Roman Decorating Products – Calumet City, Illinois

For Technical Help: Call 1-800-488-6117 or Email: technicalhelp@romandec.com

www.romandecoratingproducts.com

PRO-543

Universal Wallpaper Paste

Strippable, Non-Staining Wallcovering Adhesive

Product Number(s): 207803, 207805, 207811

Base: Synthetic polymer

Product Information

General Properties: PRO-543 Universal Wallpaper Paste makes hanging

borders and wallcovering easy. This adhesive may be used on most sealed

surfaces except poor quality latex paint.

 Extended open time & slip

 Excellent adhesion

 May be used with pre-pasted or unpasted wallcovering

Recommended Uses: Hanging borders, light and medium-weight

wallcovering on sealed, painted surfaces

NOT Recommended for: Bare drywall, extremely rough surfaces such as

concrete block, stucco and other rough, highly textured surfaces, and poor

quality latex paint.

Compatible Coatings: All ROMAN

primers

Mildew-Resistant: All Roman products contain biocides for in-can

preservation

Specification Data

Percent Solids: Approximately 10.3%

Coverage: Up to approx. 250 square feet per gallon

Viscosity: Approximately 14,000 cps

VOC (actual): 2.55%

VOC (regulatory): ≤ 26 g/L

Storage: Avoid freezing; keep in cool, dry place

Drying Time: Drying time will vary depending on the temperature, ventilation

and humidity of the room.

PAGE 1
Technical Data: PRO-543 Updated: 10/26/17 PRO-543 Universal Wallpaper Paste Strippable, Non-Staining Wallcovering Adhesive Product Number(s): 207803, 207805, 207811 Base: Synthetic polymer Product Information General Properties: PRO-543 Universal Wallpaper Paste makes hanging borders and wallcovering easy. This adhesive may be used on most sealed surfaces except poor quality latex paint.
PAGE 2
Technical Data: PRO-543 Application Instructions Updated: 10/26/17 Surface Preparation: Surface must be free from grease and other residues, dry, smooth and structurally sound. Check surfaces for loose wallcoverings. Repair all unsound surfaces. Before proceeding with any unusual conditions, consult your adhesive or wallcovering supplier. To check for poor quality latex paint, cut an “x” in the wall and apply clear tape over it. Remove quickly; if there is paint on the tape, it is of poor quality.