RollPlay 6V Mini Quad Owner’s Manual and Assembly Instructions Model #: ACQUAD-P, ACQUAD-CAM, ACQUAD Read and understand the entire manual before assembly and operation. The vehicle must be assembled by an adult who has read and understands the instructions. Made in China. Styles and colors may vary. Do not return to store. Visit us online at www.rollplay.net for assistance and replacement parts.
Introduction Thank you for purchasing this RollPlay vehicle from Rollplay. We hope the rider enjoys it for miles to come. Please read this instruction guide carefully before assembling and operating the vehicle. Please have your model number and serial number ready before calling. Please have proof of purchase. Keep your sales receipt or register your product at www.rollplay.net. Please contact Rollplay Customer Service with any questions. Hours: 9 AM - 5 PM (CST), Monday - Friday Web: www.rollplay.
IMPORTANT! YOU MUST CHARGE THE BATTERY FOR 24 HOURS BEFORE FIRST USE! Charge the battery after each use. Charge the battery at least once a month, even if the vehicle is not in use. DO NOT RETURN THIS ITEM TO THE STORE! Call Customer Service if you need assistance or replacement parts. Please have your model number and serial number ready before calling. Please have proof of purchase. Keep your sales receipt or register your product at www.rollplay.net as we may require proof of purchase.
Table of Contents Safety...........................................................6 Parts ............................................................8 Charging Instructions...................................9 Assemble the Wheels.................................10 Attach the Handlebar.................................11 Assemble the Front Bumper......................12 Attach the Seat...........................................13 Operating Instructions................................14 Maintenance...........
Safety WARNING: SAFETY RIDING RULES The user must follow all safety rules and guidelines, or serious injury or death may occur to the user. Always use common sense and safe practices when using the vehicle. The user must be at least 18 months old and weigh no more than 20.4 kg (45 lbs). This product contains small parts that are for adult assembly only. Keep small children away when assembling. Remove and dispose of all protective material and plastic bags before assembly.
Safety (Continued) 7 WARNING: BATTERY SAFETY • Battery posts, terminals and related accessories contain lead and lead compound (asic) chemicals known to the state of California to cause cancer, reproductive harm, and are toxic and corrosive. DO NOT open the battery. • Contact exposure to battery leakage (lead acid) may cause serious injury. Immediately contact your doctor if exposure occurs. If the chemical is on the skin, flush immediately with cool water for 15 minutes.
Parts 7 9 8 10 3 4 4 4 5 5 6 2 1 1. Battery 2. Charger 3. Quad Body 4. Wheels (4) 5. Hex Nuts (Installed on wheel axles) 6. Front Bumper 7. Handlebar 8. Seat 9. Screw Wrench 10.
Charging Instructions 9 YOU MUST CHARGE THE BATTERY FOR 24 HOURS BEFORE THE FIRST USE! ONLY AN ADULT SHOULD HANDLE THE BATTERY AND CHARGER. To Charge the Battery: 1. Ensure the quad is stopped and turned off. 2. Unlock and remove the seat. 3. Unplug the red battery connector (A) from the red engine connector (B). 4. Connect the red battery connector (A) to the red battery charger connector (C) and plug (D) into a 120 V outlet. To Unplug the Battery: 1. Unplug the battery charger (D) from the outlet. 2.
Wheel Assembly Wheel Flat Washer Hex Nut Split Washer 1. Remove the hex nut, split washer and small, flat washer from each axle. The large, flat washer stays on the axle. 2. Slide the wheel (4) onto the axle. 3. Slide small, flat washer onto the axle. 4. Slide the split washer onto the axle. 5. Slide the hex nut onto the assembled wheel and tighten in place with a wrench. 6. Repeat steps 1-5 for the remaining wheels.
Attach the Handlebar 11 A B 1. Remove the screw and nut from the handlebar assembly (7) before attaching. 2. Plug the handlebar connector (A) into the dashboard connector (B). 3. Slide the handle bar (7) onto the steering rod, and align the screw holes on the handlebar with the holes on the steering rod. 4. Insert the screw into the hole and fasten the nut to secure.
Assemble the Front Bumper 1. Flip the quad onto its back 2. Slide the square hole on the back of the front bumper (6) onto the front post protruding from the quad 3. Align the three screw holes on the bumper with the three screw holes on the quad. 4. Remove the three screws from the hardware bag (10). 5. Using a screwdriver, tighten the screws to secure.
Attach the Seat 13 1. Ensure the red battery connector is connected to the red engine connector before attaching the seat 2. Position the seat (8) over the battery compartment 3. Turn the lock at the end of the seat to the open position and align the lock with the lock hole on the back of the battery compartment 4. Slide the notch on the front of the seat into the hole on the front of the battery compartment 5.
Operation Finger Switch • • • • • The rider should be sitting comfortably on the quad Push the finger switch on the handlebar to go forward Release the button to stop the quad The quad drives 2 MPH in a forward movement only Use the handlebar to turn the quad to the left and the right
Maintenance 15 Important Battery and Charger Information • Only an adult who has read and understands the safety warnings may handle and operate the battery and battery charger. Keep away from children. • Charge the battery for 24 hours before using the vehicle for the first time. • Charge the battery immediately after each use. Charge for at least 8-12 hours, but no more than 20 hours. • Charge the battery at least once a month, even if the vehicle is not used or stored.
• • • • • • General Care Regularly inspect all vehicle parts to ensure they are in good working condition. Regularly inspect the charger, cord, plug, and other related parts for damage. Remove any damaged parts and immediately contact Customer Service for replacement parts. See Service and Repairs on Page 20 for more information. DO NOT operate the vehicle if there are any damaged parts. Carefully clean the vehicle with a damp cloth and mild soap. Do not get water in or near any electrical parts.
Troubleshooting Guide 17 Completely read through the manual and troubleshooting guide before contacting Customer Service.
Problem Vehicle needs a push to start Cannot stop the quad Motor or gear box making grinding noises Battery will not recharge Battery makes bubbling noise while recharging Battery produces noise and heat when charging Potential Cause Loose wires or loose connectors Solution Ensure the battery connectors are securely attached. If wires are loose, contact Customer Service for repairs “Dead spot” on motor A “dead spot” means electricity is not being delivered to the terminal.
FCC Information 19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Service and Repairs Do not return this vehicle to the store. If your product requires service, repairs or replacement parts, please visit us online at www.rollplay.net Or contact us at: Phone: 1-888-982-9309 Email: customerservice@rollplay.net Web: www.rollplay.net Hours: 9 AM - 5 PM (CST), Monday - Friday For a list of available replacement parts, please visit www.rollplay.net.
Warranty 21 Rollplay 6-Volt Limited Warranty • One-year limited warranty from the date of purchase with proof of purchase from an Rollplay certified retailer. • Six month limited warranty on the 6-Volt battery with proof of purchase from an Rollplay certified retailer. • This one-year limited warranty covers the ride-on vehicle against defects in materials and workmanship to the original purchaser. Proof of purchase receipt from an Rollplay certified reseller is required.
Product Registration 23 Fill out the form below and mail it to: Rollplay 1131 W. Blackhawk St. Second Floor Chicago, IL 60642 OR fill out the form online at www.rollplay.net. We will use the information provided only for your warranty. We will not sell, rent or share your personal information. Product Registration First Name: Last Name: Title: Address: City: State: Email: Zip Code: Phone: Date of Purchase: The following product information is on the cover of the owner’s manual.
