Owner's Manual Drums ARX-01

33
In the Utility screen you can initialize kits or tones, or copy the
settings of a tone to a different tone.
Initializing a kit or tone
This operation lets you return the settings of the current kit or current
tone to their default values.
Kit Init will initialize the settings of the current kit.
Tone Init will initialize the settings of the current tone.
1. Select the kit or tone that you want to initialize.
2. In the Utility screen, choose Kit Init or Tone Init.
3. When the confirmation screen appears, press [F7 (OK)]
button.
If you decide to cancel, press [F8 (EXIT)] button.
* If you’ve installed the ARX-01 in a Fantom-G6/G7/G8, executing
a Factory Reset for the Fantom-G6/G7/G8 will reset the expan-
sion boards to their factory-set condition.
Copying a tone
This operation lets you copy the settings of a tone to a different tone
of the currently selected kit. Making good use of this operation will
help you create kits efficiently.
1. Select the tone that you want to copy.
2. In the Utility screen, choose Tone Copy.
The Tone Copy screen will appear.
3. Choose the "Destination (copy-destination)" tone
number.
4. Press [F8 (Execute)] button.
A confirmation message will appear.
5. Press [F7 (OK)] button to execute the copy.
If you decide to cancel, press [F8 (EXIT)] button.
Initializing a Kit/Tone or copying a
Tone (Utility screen)
ARX-01_e.book 33 ページ ２００８年２月１９日 火曜日 午後４時７分