User Manual

Playing Multiple Parts (Multi Part Play)

Performance

Functions

Editing

Sequencer

(Creating Songs)

Sampler Pads DAW

Appendix

Overview Performing SettingsPerforming

Selecting the Parts that Sound

(Keyboard Switch)

Here’s how to select the parts that are heard when you play the

keyboard.

1. Put the FA in multi part play mode (p. 26).

2. Move the cursor to the “KBD” eld of the part whose

keyboard switch setting you want to change, and use the

dial or the [DEC] [INC] buttons to turn it on/o.

When you play the keyboard, you hear parts whose keyboard

switch is turned on.

MEMO

• If you want to play multiple parts as a layer, turn on the

keyboard switch of those parts. Also, ensure that one of the

parts whose keyboard switch is on is the current part (the

currently selected part).

• If a part whose keyboard switch is turned o becomes the

current part, you can play just the sound of that part by itself.

• The current part is memorized in the studio set.

• You can use the pads to turn the keyboard switch on/o (p. 85).

Switching Studio Sets

Here’s how to switch between studio sets.

There are two banks of studio sets, as follows.

Bank Explanation

PRST (preset)

Non-rewritable studio sets. You can edit a studio set

and save the edited result in the user bank.

USER (user) Studio sets you edit can be saved in this bank.

1. Move the cursor to “STUDIO SET,” and use the dial or the

[DEC] [INC] buttons to select a studio set.

MEMO

You can move the cursor to “STUDIO SET” and press the

[ENTER] button to access the STUDIO SET LIST screen. You can

also select a studio set from the list.