Musical Instrument Owner's Manual AT90S, 80S, 60S

131
Chapter 7 Recording/Playing Back What You Play
When the performance song loaded from a disk is a Standard
MIDI File, “ ” will be displayed on the Main screen.
fig.07-06
2. Press the [Demo] button.
fig.01-01
All performance data saved on the floppy disk will be
played consecutively.
3. To stop playback, press the [Play/Stop] button.
fig.07-08
4. Press the Eject button.
fig.02-19
The floppy disk is ejected a little out of the slot. Gently
grasp the end of the floppy disk and pull it out.
To play back only one song
1. Hold the floppy disk with the label facing
upwards, and push it into the disk drive until it
clicks into place.
The disk drive is on the right side of the unit, above the
keyboard.
2. Press the [Song] button.
fig.07-09
The Song Select screen appears.
fig.07-10_50
3. In the screen, touch < >< > to select the song
that you wish to play back.
4. Touch < > to play back the song.
5. Touch < > to stop the song.
You can also play back or stop the music data by touching
<Play> or <Stop> in the Rec/Play screen. By touching
<Bwd> or <Fwd> you can rewind or fast-forward the
performance.
RegistrationSong
Composer
Reset
Rec
Play/Stop
Demo
RegistrationSong
Composer
Reset
Rec
Play/Stop
Demo
Eject Button
RegistrationSong
Composer
Reset
Rec
Play/Stop
Demo