User Manual

Panel Descriptions

fig.panel-vs-700c-rear.eps

A. TO I/O Connector

Use the dedicated cable to connect the VS-700C Console to the VS-700R I/O unit. Do not use any cable other than the

dedicated cable.

➔

“Connecting Your Computer and Sound Reinforcement Equipment”

(p. 27)

B. USB Connector

By connecting the USB connector of the console directly to your computer (without using the VS-700R I/O unit), you

can use the console as a control surface.

➔

“Using only the VS-700C Console (Standalone Mode)”

(p. 164)

C. SETTING DIP Switches

Change the settings of these switches if you have connected the console directly to your computer (without using

the VS-700R I/O unit).

➔

“Using only the VS-700C Console (Standalone Mode)”

(p. 164)

D. FOOT SW Jacks

Here you can connect two foot switches.

➔

“Starting/Stopping Playback With a Foot Switch”

(p. 55)

E. LCD CONTRAST Knob

This adjusts the brightness of the LCD display.

F. AC Inlet

Connect the included power cord to this inlet.

➔

“Connecting the Power Cord”

(p. 26)

G. POWER ON Switch

Press to turn the power on/off.

➔

“Turning the Power On”

(p. 28)

Rear Panel

A B C D E F G

VS-700_r_e.book 18 ページ２００８年１１月２０日　木曜日　午後２時２８分