User Manual

139
Creating a Performance
Overview Connections VS-700C Console VS-700R I/O Fantom VS Appendix
Mono/Poly
Set this parameter to “MONO” when the patch assigned to
the part is to be played monophonically, or to “POLY” when
the patch is to be played polyphonically. If you want to use
the Mono/Poly setting of the patch assigned to the part (p.
99), set this to “PAT.”
Value: MONO, POLY, PAT
This setting is ignored for parts to which a rhythm set is
assigned.
Legato Switch
You can add legato when performing monophonically. The
term “legato” refers to a playing style in which notes are
smoothly connected to create a flowing feel. This creates a
smooth transition between notes, which is effective when
you wish to simulate the hammering-on and pulling-off
techniques used by a guitarist.
Turn this parameter “ON” when you want to use the Legato
feature and “OFF” when you don’t. If you want to use the
Legato Switch setting of the patch assigned to the part (p.
99), set this to “PAT.”
Value: OFF, ON, PAT
This setting is ignored for parts to which a rhythm set is
assigned.
Portamento Switch
Specify whether portamento will be applied. Turn this
parameter “ON” when you want to apply Portamento and
“OFF” when you don’t. If you want to use the Portamento
Switch setting of the patch assigned to the part (p. 100), set
this to “PAT.”
Value: OFF, ON, PAT
This setting is ignored for parts to which a rhythm set is
assigned.
Portamento Time
When portamento is used, this specifies the time over which
the pitch will change. Higher settings will cause the pitch
change to the next note to take more time. If you want to use
the Portamento Time setting of the patch assigned to the
part (p. 100), set this to “PAT.”
Value: 0–127, PAT
This setting is ignored for parts to which a rhythm set is
assigned.
Vibrato Rate
For each part, adjust the vibrato speed (the rate at which the
pitch is modulated). The pitch will be modulated more
rapidly for higher settings, and more slowly with lower
settings.
Value: -64– +63
Vibrato Depth
For each part, this adjusts the depth of the vibrato effect (the
depth at which the pitch is modulated). The pitch will be
modulated more greatly for higher settings, and less with
lower settings.
Value: -64– +63
Vibrato Delay
For each part, this adjusts the time delay until the vibrato
(pitch modulation) effect begins. Higher settings will
produce a longer delay time before vibrato begins, while
lower settings produce a shorter time.
Value: -64– +63
VS-700_r_e.book 139 ページ ２００８年１１月２０日 木曜日 午後２時２８分