RODIA WET GRINDER NS125 OPERATING MANUAL
CAUTION Carefully read and understand all Safety and Operating Procedures prior to using the Rodia® Angle Ginder Keep this Manual in a safe place for future reference. Enter the Serial Number of your new Rodia® NS125 Angle Grinder in the box below.
TABLE OF CONTENTS 1. RODIA SAFETY Safety Messages . ............................................................................................................... 4 Damage Prevention and Information Messages . ....................................................................... 4 General Safety Precautions and Hazard Symbols....................................................................... 4 California Proposition 65 Message .........................................................................
RODIA SAFETY It is extremely important that you read and understand all of the safety instructions, the operating instructions and the maintenance instructions. If these instructions are not followed, serious injuries and/or death could occur to you or to others. Also, failure to read and follow the enclosed maintenance instructions can lead to equipment failure, damage to the equipment or reduced lifetime of the equipment.
RODIA SAFETY ● KEEPING THE WORK AREA CLEAN. It is important that the working area be clean so as to avoid potential accidents or injuries. ● DO NOT USE THE EQUIPMENT IN DANGEROUS ENVIRONMENTS. It is important that power tools not be used in wet environments. The equipment should never be used in the rain. Also, it is advisable to keep the working area well lit. ● CHILDREN SHOULD BE KEPT AWAY FROM THE WORKING AREA. Only the operator of the equipment should be in the working area.
RODIA SAFETY ● TOOL MAINTENANCE. It is important to keep tools clean and in good working order. This will result in optimal performance of the machine. Always follow the maintenance instructions for proper tool maintenance. ● REDUCING ACCIDENTAL STARTING OF MACHINE It is important to be sure that the switch is in the OFF position before plugging in the machine. ● EQUIPMENT ACCESSORIES.
RODIA SAFETY HAZARD SYMBOLS ● READ MANUAL CAREFULLY BEFORE USE Carefully read and understand this operating manual and the enclosed safety instructions prior to using the machine. ● ELECTRICAL SHOCK It is important to never touch electrical components of the machine while the machi- ne is in operation.
RODIA SAFETY The use of this machine generates dust. Excessive airborne particles may cause irritation to eyes, skin and the respiratory tract. To avoid breathing impairment, always us dust controls and protection suitable to the material being mixed. Comply with American National Standards Institute Safety Code, B7.1 and, Occupational Safety and Health Act covering speed, Safety Guards, Flanges, Mounting Procedures, General Operating Rules, Handling, Storage and General Machine Conditions.
MACHINE SPECIFICATIONS Rodia® 5" Diamond Wet Blade Superior Quality Diamond Wet Blade with Continuous Rim. For Glass Mosaic Tiles. Diamond Height 7,5 mm. Water Tank Part.-Nr. 01.02.
OPERATING INSTRUCTIONS BEFORE USE Take the machine out of the box and check for any possible damage that may have occurred during shipment. Never use damaged equipment or blades. CUTTING PROCEDURES Turn off and unplug the machine before mounting or replacing the cutting blade. Never use a cutting blade with a lower RPM than that of your angle grinder (See specifications).
REPAIR & MAINTENANCE 3. Motor Always unplug the machine before attempting any maintenance. The rotor and stator in the motor are the core of the machine. Do not scratch the surface of the windings in the motor, and never apply oil or water on it. 1. Inspection of screws Periodically inspect the screws for safer operation. Tighten loose screws firmly to prevent hazardous situations. 4. Keep ventilation slots clean 2.
PAGE 12 RODIA ANGLE GRINDER OPERATING MANUAL V01/2007R1
