Owner manual

Publication 193-UM006A-EN-P – October 2005
Device Parameters 4-5
Advanced Setup Group
Bit Function:
1514131211109876543210
XTrip
X Warning
XOut A
XIn 1
XIn 2
X Motor Current
XXXXXXXXXX Not Used
Firmware Parameter No. 11
This parameter reports the firmware revision of the
DeviceNet Module.
Access Rule Get
Data Type UINT
Group Monitor
Units —
Min. Value 0
Max. Value 65535
Default Value None
Trip Enable Parameter No. 12
This parameter allows the installer to enable or
disable the Jam Trip function
1 = Enabled
0 = Disabled
Access Rule Get/Set
Data Type WORD
Group Advanced Setup
Units —
Min. Value 0000000000000000
Max. Value 0000000000000100
Default Value 0000000000000000