User Manual

Back Panel Features

POWER CHORD/FUSE Receptacle - plug the included power chord to this receptacle. Make sure you

follow all precautions in this manual and any local regulations.

MUTE FT SW Jack - Using an optional RTS (Momentary) footswitch (not included) will MUTE both

Outputs of the VersaTune to allow you to tune in silence. When the MUTE is on the MUTE LED on the

front panel will be Lit. No sound will be passed through either output.

INPUT JACK 1 - (CH1) using a standard 1/4” cable, plug your guitar or bass in here. This Jack provides

theoutputtoOUTPUTJACK1onthebackpanel.SeetheOUTPUTJACK1(Point6)formoredetails.

Note,whenthisjackisusedtheInputJack1onthefrontpanelisdisabled.

OUTPUT JACK 1 - (CH1) using a standard 1/4” cable, plug from here in your next device in your signal

chain(amp,rackeffectsprocessor,preamp,etc.).ThisjackprovidestheoutputfromtheeitherINPUT1

Jacks.

INPUT JACK 2- (CH2) using a standard 1/4” cable, plug your guitar or bass in here. This Jack provides

theoutputtoOUTPUTJACK2onthebackpanel.SeetheOUTPUTJACK2(Point4)formoredetails.

Note,whenthisjackisusedtheInputJack2onthefrontpanelisdisabled.

OUTPUT JACK 2 - (CH1) using a standard 1/4” cable, plug from here in your next device in your signal

chain(amp,rackeffectsprocessor,preamp,etc.).ThisjackprovidestheoutputfromtheeitherINPUT2

Jacks.

NOTE: The VersaTune has two inputs and outputs so that you can plug two different

  instrumentsintoitatthesametime,yetgototwodifferentampliers.Thebackpanel 

  inputsdisablesthefrontpanelinputs.