User guide

69
Step 10
Step 11
To make changes to the second Pedal Controller turn the PARAMETER SELECT
knob clockwise one click.
Repeat steps 3-10 to make changes to NUMB 2, PARA 2, ULIM C2, LLIM C2,
NUMB 3, PARA3, ULIM C3, LLIM C3.
Selecting a lower limit value that is greater than the upper limit value will invert the response of
the controller - i.e. the toe position of the expression controller will provide the minimum value,
while the heel position will provide the maximum value.
You now must store your changes. If you have made any changes to any parameter, the LED
abovethe"STOE"buttonwilllight.PesstheSTOEbuttontosavethechangesouhave
mae."STOEATPESET"willashintemittentlwiththecuentpeset.Ifouwoul
like to save this change to the current preset, press the STORE button again. To save this ad-
justepeset(anthepaametesouhavejustchange)toaiffeentpesetlocationusethe
PRESET SELECT knob to choose the preset and then press the STORE button again. Note
thatoingthiswill"ove-wite"thepesetouaesavingto.
NOTE: To exit Pedal Controllers at any time or cancel any changes you have made, turn
either the PRESET or FUNCTION SELECT knob. The word CANCEL will ash on the display
and then return you to the preset you were working on.
Step 12
8. Pedal Controllers......continued.........
pedal controlers
numb2 IPEd
b12 sweet dream
STORE AT PRESET
b12 sweet dream
37 fla-DLY-REV
b12 sweet dream
cancel
b12 sweet dream
37 fla-DLY-REV