Manual

8. Operation Mode

The Utopia G200 has two OPERATION MODES - Preset and 2nd. When in Preset mode you can

select any preset you would like in the various banks. When in 2nd Mode you are in the 2nd function

mode of the selected preset. The 2nd Function mode allows you to turn on and off various aspects of

the preset.

In the PRESET MODE the LEDs on the pedal board will be lit "GREEN".

When in this mode you can select any preset in any bank that you would prefer.

PRESET MODE

2ND FUNCTION

MODE

To enter into the 2ND FUNCTION MODE, press the "2nd" button. The LED

above the 2nd Button will turn "RED". Once in the 2ND FUNCTION MODE

you can turn on and off the assigned Effect, MUTE/TUNER and the TAP Delay

function with the selected preset.

Here is a list of those effects that can be accessed within each preset in the 2ND

FUNCTION MODE:

Exit 2nd Function

EFFECT ON/OFF - turns on or off the assigned effect to that footswitch, either

Bypass, Toggle, Solo, Compressor, Modulation Effect, Delay, Reverb Input or

Tru-Bypass (one must be set & stored in the Footswitch Mapping Function).

Bypass Effect bypass - turns on or off all the effects and bypasses

them completely.

Toggle Channel Toggle - allows you to toggle between two dif-

ferent channels (for example, between Clean and MEGA)

SOLO Solo Boost - allows a 4db boost in output, ideal to get a

boost when soloing

Compressor Turns on and off the Compressor within the preset.

MOD EFX Turns whatever Modulation Effect (Chorus, Pitch Shift,

Flanger, Tremolo) you have assigned on or off.

Delay Turns on and off the Delay within the preset

Reverb Input Turns on and off the Reverb (Active or Muted)

TBypass Tru-Bypass - turns on and off the effects and preamp and

allows the signal to pass through the G200 unaffected.

MUTE/TUNER - pressing this button will MUTE the output and turn on the

built-in Tuner so that you can tune in silence.

TAP - this button allows you to set the delay rates by tapping this button at the

tempo desired.

2ND - pressing the button again takes you OUT of the 2nd Function mode and

return to PRESET MODE

BUTTON NUMBER 2ND FUNCTION