Owner's manual

9. PC Interface - Download Presets

1) Download the Rocktron RepliTone MP Preset Manager at www.rocktron.com.

2) Open the RepliTone MP Preset Manager on your PC. Try to move one of the slider bars to make sure the program

is working correctly.

3) Set all controls (Gain, Level, Bass, Mid, Treble, Delay Level, Reverb Level, and Effect Adjust) on your RepliTone

to OFF by turning the knobs full to the left. You will need a MIDI-to-Game-Port cable to make the necessary

connections. This cable is available at most music stores selling pro-audio gear.

4) Connect the 15 pin side of the cable to your computer's game port connector jack.

5) Connect your PC Midi In connector to the RepliTone MP's Midi Out jack.

6) Connect your PC Midi Out connector to the RepliTone MP's Midi In connection.

7) Adjust the Gain Control on the RepliTone MP Preset Manager. Flashing LED's on the RepliTone MP confirm the

connection from the PC is made.

8) Click on the REQUEST button. The RepliTone will upload the 128 existing presets to the RepliTone Preset

Manager for editing.

Edit presets with your computer, save, store or share presets with other users. The Replitone MP's pc interface

allows you total flexibility with your new product. If you are like most players - sometimes you play electric

heavy rock - sometimes the classics - sometimes weddings...the list goes on an on. Within a very short time you

can set up all of your gigs and put the presets in the order you use them for each gig using the PC interface.

You can then download the presets to fit the appropriate gigs.