® ® car audio for fanatics ® RFP2208 RFP2210 RFP2212 RFP2215 ® RFD1208 RFD1210 RFD1212 RFD1215 RFD1218 POWER ¤ D V C RFR2210 RFR2212 RFR2215 INSTALLATION & OPERATION
–2– Foam Surround X X X X Hyper-Extended Pole Piece Vented Pole Piece Aero-Vent Back Plate Magnet Bumper 0.30 8.50 0.625 17.70 Sealed (ft3) Sealed (liters) Vented (ft3) Vented (liters) ENCLOSURE VOLUME X 2.0 Aluminum Voice Coil Voice Coil Diameter Foam SPP Foam SPP Foam SPP 28.32 1.0 21.24 0.75 X X X X X 2.5 56.63 2.0 35.40 1.25 X X X X X 2.5 70.79 2.5 70.79 2.5 X X X X X 2.
–3– PUNCH HX2 DVC POWER DVC .43 Xmax (in.) 119 179 Mounting Diameter (mm) Mounting Depth (mm) 7-1/16 Mounting Diameter (in.) 4-11/16 .035 Speaker Displacement (ft3) Mounting Depth (in.) 250/500 Power Handling (RMS/Peak) 84 13 Vas (liters) Sensitivity (dB @1w/1m) .460 Vas (ft3) 11.0 .37 Qts Xmax (mm) 35 4Ω x 2 149 5-7/8 241 9-1/2 .06 400/800 85 13.0 .51 42 1.483 .49 30 4Ω x 2 160 6-5/16 283 11-1/8 .085 400/800 87 13.0 .51 90 3.178 .
Dear Customer, Congratulations on your purchase of the world's finest brand of car audio speakers. At Rockford Fosgate we are fanatics about musical reproduction at its best, and we are pleased you chose our product. Through years of engineering expertise, hand craftsmanship and critical testing procedures, we have created a wide range of products that reproduce music with all the clarity and richness you deserve.
TABLE OF CONTENTS Specifications ............................................................................................2 Dear Customer..........................................................................................4 Introduction ..............................................................................................5 Power DVC Woofer Contents....................................................................5 Recommended Enclosures ..................................................
RECOMMENDED ENCLOSURES Punch HE2 8” - Punch HX2 8” Recommended Vented 0.625 ft3 (17.70L) H = 11" (27.94cm) H = 11" (27.94cm) Recommended Sealed 0.30ft3 (8.50L) W = 19.75" (50.16cm) D = 8" (20.32cm) W = 11" (27.94cm) 2 3 D = 8" (20.32cm) Range in Cubic Feet 4 5 0.3 .50 .625 1 1.50 0.3 .50 Range in Cubic Feet 6 1 2 3 4 5 6 *Fb = 40 Hz Pd = 2.5" (6.35cm) Pl = 11.25" (28.57cm) Punch HE2 10” - Punch HX2 10” - Power DVC 10" Recommended Vented 1.0 ft3 (28.32L) H = 13" (33.
Punch HE2 15” - Punch HX2 15” - Power DVC 15" Recommended Vented 2.5ft3 (70.79L) H = 20" (50.80cm) H = 20" (50.80cm) Recommended Sealed 2.5ft3 (70.79L) W = 25" (63.50cm) D = 12" (30.48cm) 2 3 3.50 2.50 0.3 Range in Cubic Feet 1 4 5 D = 12" (30.48cm) Range in Cubic Feet 0.3 6 1 2 2.25 2.50 W = 25" (63.50cm) 3 4 5 6 *Fb = 35 Hz Pd = 4" (10.16cm) Pl = 8" (20.32cm) Punch HX2 18” 3 Recommended Vented 4.0ft3 (113.27L) H = 20.5" (52.0cm) H = 20.5" (52.0cm) Recommended Sealed 4.
WIRING CONFIGURATIONS By varying the wiring configuration of your speakers you can create an impedance load to match your system. Since each voice coil of a DVC speaker carries its own impedance, altering the wiring configurations give a range of options for impedance load. Series, Parallel, or Series-Parallel wiring configurations are different techniques for wiring speakers that provide different loads. Series configuration is a string method where speakers are wired end to end.
BUILDING AN ENCLOSURE To work properly, the walls of the enclosure must be rigid and not flex when subjected to the high pressures generated by the speaker's operation. For optimum performance, we recommend using 3/4" MDF (Medium Density Fiberboard) and internal bracing. The enclosure should be glued together and secured with nails or screws. MDF is porous; therefore, it is suggested to also seal the outside walls with polyurethane.
LIMITED WARRANTY INFORMATION Rockford Corporation offers a limited warranty on Rockford Fosgate products on the following terms: • Length of Warranty 1 year on speakers 3 years on electronics 1 years on source units 90 days on speaker B-stock (receipt required) 90 days on electronic B-stock (receipt required) • What is Covered This warranty applies only to Rockford Fosgate products sold to consumers by Authorized Rockford Fosgate Dealers in the United States of America or its possessions.
TE RN AT IO N AL IN N IO AT RM FO IN – 11 –
LEA DETENIDAMENTE LAS SIGUIENTES INSTRUCCIONES DE INSTALACÍON DEL PRODUCTO. ESPAÑOL INTRODUCCÍON Los woofers Power DVC son una gama completa de drivers de baja frecuéncia que comprenden diámetros de 10" a 15". Diseñada para ofrecer la máxima calidad, los Woofers ofrecen al entusiasta principiante en sistemas de car audio, la oportunidad para disfrutar de un bajo sólido en las bajas frecuéncias.
VEUILLEZ LIRE LES INSTRUCTIONS SUIVANTES POUR L'INSTALLATION DE CE PRODUIT. INTRODUCTION CALCUL DU VOLUME On calcule le volume en mesurant la dimension de chaque côté et en utilisant la formule suivante: Volume Hauteur (cm) x Longueur (cm) x Largeur (cm) du caisson = 1000 (Litres) Si les due côtés qui se font face n'ont pas la même longueur, additionnez les et divisez le résultat par deux pour obtenir la moyenne des deux longueurs.
BITTE LESEN SIE DIESE GEBRAUCHSANLEITUNG ZUERST SORGFÄLTIG DURCH. DAS KANN SIE VOR FALSCHEM EINSATZ, AUSFALLEN ODER SOGAR BESCHÄDIGUNG DES PRODUKTES ODER IHRES FAHRZEUGES SCHÜTZEN. EINLEITUNG Die Power DVC Woofer sind eine komplette Produktlinie von TiefFrequenzlautsprechern mit Durchmesser von 25 cm bis zu 38 cm, erhältlich in der Impendanz 4 Ohm x 2.
LEGGERE CON ATTENZIONE LE SEGUENTI ISTRUZIONI PRIMA DELL'INSTALLAZIONE DEL PRODOTTO. INTRODUZIONE I woofer Power DVC sono una linea completa di altoparlanti per basse frequenze con diametri che vanno da 25 a 38 cm e disponibili sia a 4 ohm x 2. Impiegando le piú aggiomate tecnologie e materiali, siamo in grado di offrire altoparlanti che possono riprodurre un'elevata pressione sonora alle basse frequenze mantenendo i volumi di impiego assolutamente ridotti.
Installation assistance available at: http://www.rockfordfosgate.com/rftech MADE IN THE USA This product is designed, developed and assembled in the USA by a dedicated group of American workers. The majority of the components used in the construction of this product are produced by American companies. However, due to the global nature of their manufacturing facilities and the loudspeaker parts industry in general, some parts may be manufactured in other countries.