ROC006P V-Tail Glider Manual
1. The propeller should rotate clockwise
when viewing the plane from the rear.
Note: Be careful not to accidently
discard the propeller hub adapter.
CAUTION: Before testing the propeller,
make sure the tail of the plane is firmly
on the model stand and ensure there
are no people or objects in the range of
the propeller.
Check the motorrotatingdirection
page17
Get your model ready to fly
Check the control throws
The suggested control throw settings for ROC HOBBY V-tail are as follows (Dual rate
setting):
High Rate Low Rate
Ailerons 18mm up/down 11mm up/down
Elevator 13mm up/down 8mm up/down
Rudder 12mm up/down 7mm up/down
Flaps Full 18mm down
Tips: At first flight, fly the model in low rate. When you first use high rates, be sure
to fly at medium speeds since high rates will allow EXTREME maneuvering.
Flaps
Flaps in landing position
Normal flaps position
For More Info Vist: www.motionrc.com