ROC006P V-Tail Glider Manual

4. Insert the aluminum wing spare into the main
wing panel until the white retainer ring touches
the wing.
5. Mount the main wing into the wing saddle. You
will need assistance to help pull the leads
from the battery compartment side so that the
wires do not interfere with the wing seating
fully into place.
page9
Assemble the plane
6. Check to make sure the two wing halves are
fully seated into place.
7. Snap in the main wing securing bolts. Note
that the bolts are different sizes. The longer
bolt should be installed in the hole closest to
the front of the airplane.
8. The bolts can be removed later by using a
screwdriver or similar tool.
4
6
8
7
5.1
5.2
For More Info Vist: www.motionrc.com