Installation and Operation Guide

2
Overview
Contents of packaging:
1 x Robinhood Supertub (incl waste system and square brushed stainless steel pole handle)
1 x Installation kit (incl adjustable feet and 3 way ball valves)
1 x Stainless Steel gooseneck tap (incl flexible hoses and mounting nut)
Pre-installation
Important:
o Please read the entire instructions before installing the laundry tub.
o Ensure the household pipes are thoroughly flushed to remove debris before connecting your laundry tub to
the pipe works. To prevent foreign particles damaging the ceramic cartridge an ‘in-
line’ filter is
recommended to be installed prior to the mixer.
o Warranty on single lever mixer is void if the in-line filter is not fitted.
o Recommended temperature range 5° to 65°C. Maximum temperature 80°C.
o Maximum pressure 72.5 PSI (500 kPa), minimum pressure 22 PSI (150 kPa).
Regulation compliance
Comply with current Drainage and Plumbing Regulations as required by your local authority. Sanitary
plumbing shall only be carried out by a Registered Plumber. All plumbing work must be done in accordance
with local and national building and plumbing codes as applicable.
All electrical work must be done in
accordance with local and national electrical codes as applicable. In some instances this product may need to
be earthed.
Determine site
Determine the most suitable position for the laundry tub. It may be used either to the left or right of the
washing machine. Allow 10mm clearance between the units. Mark the position on the floor as reference.
Important safety information
This Robinhood Supertub is not intended for use by young children or infirm persons without supervision.
Young children should be supervised to ensure that they do not play with the Robinhood Supertub.
DO NOT use abrasive household cleaner.