Issue: 1 Description: Model Numbers: ROBINHOOD SLIDEOUTS RSA2CL6SS RSA2CL9SS RSA2CL6SS model pictured 1
Overview * All dimensions shown above are in mm and apply to 600mm and 900mm models Pre-installation Thank you for purchasing a quality Robinhood rangehood. Robinhood has a high standard of quality control and every rangehood is tested and approved before it leaves the factory. Important: o Please read the entire instructions before installing the rangehood. o Always switch power off prior to installation.
Pre-Installation - continued Ducting Options The method of ducting should be carefully considered before installing the rangehood. The guide below recommends the ducting components to use for all common ducting configurations - through the top of the home (for the roof and soffit) and through the rear of the home. 150mm round ducting should be used in conjunction with this model rangehood. Due to the high airflow with this rangehood there is not a re-circulating option available.
Installation continued 6mm holes Cabinet 6mm holes * All dimensions shown above are in mm TO INSTALL To install the rangehood you will need to drill four 6mm holes into the base of the cabinet to correspond with the existing holes in the rangehood as shown in the drawing above. To allow the ducting vent and power cord to fit into the cabinet, you will need to cut a 280mm x 200mm hole into the base of the cabinet as shown in the diagram above.
Cleaning and maintenance General Maintenance Switch off the rangehood before cleaning or maintenance. To prevent surface damage never use abrasive or oil based liquid cleaners. To clean the surfaces of the appliance, use mild detergent and warm water. In areas of high humidity and coastal environments cleaning should be carried out frequently. Warning: a build up of oil may occur if the compact canopy is not cleaned regularly.
Product approvals and ratings Product approval number SGS/100427 Product rating 202W Max at 220-240V 50Hz Electric approval AS/NZS 60335.2.31:2004, +A1:2006+A2:2007+A3:2009 EMC approval AS/NZS CISPR 14.
Warranty Certificate (New Zealand) Terms and Conditions The following conditions apply in respect of the warranty given in this certificate: 1. Parbury Pty Limited (“Parbury”) warrants the following Robinhood products against manufacturing defects and faulty materials, under normal use and subject to the exclusions in this certificate, for a period of: Rangehood - 24 months from date of original purchase for domestic use.
Warranty Certificate (Australia) Terms and Conditions The following conditions apply in respect of the warranty given in this certificate: 1. Parbury Pty Limited (“Parbury”) warrants the following Robinhood products against manufacturing defects and faulty materials, under normal use and subject to the exclusions in this certificate, for a period of: Rangehood - 24 months from date of original purchase for domestic use.
