Product Brochure

14 06
Tongue & Groove Flooring Adhesive
1. PRODUCT NAME
ROBERTS
®
1406 Tongue & Groove Flooring Adhesive
2. MANUFACTURER
Roberts Consolidated Industries, Inc.
300 Cross Plains Blvd
Dalton, GA 30721
[phone] / [phone]
3. DESCRIPTION
ROBERTS 1406 Tongue & Groove Flooring Adhesive is a high strength PVA
adhesive with a specialized applicator tip for precise placement of the
adhesive.
Features and Benefits
• Exceptional bond strength and fast drying; applies white and dries clear
• Meets the specifications of ANSI/HPVA Type II / D3
• Enviro-Friendly – solvent-free and LEED
®
compliant; VOC < 1 g/L,
SCAQMD Rule 1168
Uses
For bonding laminate and wood floating floors that require a tongue and
groove adhesive.
Coverage
Approximately 400 lineal feet per pint
Limitations
• Ensure adequate ventilation during flooring installation.
• Not recommended for vinyl products.
• Refer to Safety Data Sheet, www.robertsconsolidated.com, industry
standards, and manufacturer’s guidelines and specific recommendations
prior to installation for additional information.
4. TECHNICAL DATA
Product Type:
SBR Latex
Color:
Milky white
Odor:
Very mild, non-offensive
Assembly Time:
Within 5 minutes
Drying Time:
12-24 hours
VOC:
< 1 g/L
pH:
2.5-4
Shelf Life:
1 year in unopened container
Storage:
Protect from freezing. Does not require thinning.
5. INSTRUCTIONS
Preparation
Ensure tongue and groove are clean, dry and free of any loose particles or
contaminants.
Application
Follow flooring manufacturer’s guidelines for bead size and application (top
of tongue or groove application). Apply bead to tongue or groove according
to flooring manufacturer’s instructions. Insert tongue into groove and tap as
required to ensure full contact. Remove excess glue immediately. Once dry
this adhesive is highly solvent and water resistant.
Curing
Up to 12–24 hours. High temperature and low humidity will cause the adhesive
to cure faster.
After installation, restrict foot traffic and moving of heavy objects for
24–48 hours to allow adhesive to cure properly. Premature traffic can cause
installation failure.
Clean-up
Fresh adhesive – damp cloth and water.
Dried adhesive – difficult to remove.
SUPERIOR
Roberts Consolidated Industries, Inc. • www.robertsconsolidated.com • A Quality Brand of Q.E.P. Co., Inc.