User Manual

Jaune Noir Noir texte
GB.37
ENG_UD6472_1
R2-Réglages du téléphone (XNX - Renault)ENG_NX_843-1_NX_Renault_1
Software version
To display the software version, select
“Display software version” by turning
and pressing 5 or 20.
Default settings
Select “Default settings” by turning
and pressing 5 or 20. A message is
displayed on the screen requesting
confirmation of your selection. Select
“Confirm” to confirm.
All the system settings return to their
default values.
PHONE SETTINGS (depending on the vehicle)
Display the settings menu by press-
ing 9. Select “Phone settings”.
The system exits the settings mode
automatically without the need for any
action on the part of the user. You can
also exit the settings mode by press-
ing 9.
Adjusting the ringtone, voice
recognition and call volumes
Access the “Volume” menu, then select
from the following headings:
– “Voice prompt volume”;
– “Ringing volume”;
– “Communication volume”.
Adjust the volume by turning 5, 20
or 23.
The automatic call waiting func-
tion allows the user to answer a call
when it is safe to do so. We recom-
mend that you activate this func-
tion.
Vehicle/phone ringtone
You can select the type of ringtone ac-
tivated for an incoming call: either the
vehicle or phone ringtone. Access the
“Ring tone” menu then check “Vehicle”
or “Phone”.
Note: your phone may not have the
ringtone transfer function; please refer
to the compatibility list.
Manual/automatic call waiting
Access the “Put on hold” list then
check “Automatic” (default setting) or
“Manual”.
In automatic mode, a beep will sound to
indicate that a call is on hold.