Installation Guide

800.877.2376 www.robern.com

Installation instructions

Part no. 209-1275-rA rev. 06/06/17

Curated Cartesian H2 - 2 Drawer

STEP 5 - SINK ASSEMBLY

1. Thread the screws [203-1335] into the brackets [210-1100] and thread the acorn nuts [203-1337] onto the screws. Place the

assembled brackets into the vanity opening(s). Brackets should be snug and ush to the top of the vanity.

2. Place the sink(s) into the opening(s) and position the sink(s) at the front of the vanity. Test t the stone top to be sure the sink(s) is

properly located.

3. Apply a 1/4" (6mm) bead of silicone sealant on both vanity and sink ange(s).

4. Carefully place the stone top on the vanity and sink. Note: The back edge of the stone top must be ush against the wall and equal

left and right overhang on each side of the vanity.

1 2