Specifications
32
10. ChangeLog
This section summarizes all types of changes in the user manual.
Version of the
manual
Date of issue Description of changes
1.3
15/5/2012 Added chapter "Installation of diffusion lters"
1.4
18/7/2012 Added photometric diagrams for diffusion lters 20°and 40°
1.5
3/12/2012 Added chapter 3.6 Wireless DMX operation
1.6
27/01/2014 Change in the chapter "Installing diffusion lter"
1.7
05/03/2014 Added 10° diffusion lter photometric diagram
11. Maintenance and cleaning
DANGER !
Disconnect from the mains before starting any
maintenance work
A soft lint-free cloth moistened with any good glass cleaning uid is recommended, under no circumstances
should alcohol or solvents be used!
Never use alcohol or solvents for cleaning lenses in the moving head!
Use wet cloth only.
It is absolutely essential that the xture is kept clean and that dust, dirt and smoke-uid residues must not build
up on or within the xture. Otherwise, the xture‘s light-output will be signicantly reduced. Regular cleaning will
not only ensure the maximum light-output, but will also allow the xture to function reliably throughout its life.
A soft lint-free cloth moistened with any good glass cleaning uid is recommended, under no circumstances
should alcohol or solvents be used!
Lenses may require monthly cleaning as smoke-uid tends to building up residues, reducing the light-output
very quickly. The cooling fans should be cleaned according to the situation (at least annually).
The interior of the base should be cleaned at least annually using a vacuum-cleaner or an air-jet.
More complicated maintenance and service operations are only to be carried out by authorized distributors.